Epson printers

Problems and error codes

• Epson ET-2800 power light flashingThe product is cleaning the print head or charging the print head after the first ink fill. The light stays on when the cleaning cycle finishes.
• Epson ET-2800 “E-2, E-3 or E-7 (network report)”No wireless network name (SSID) was found, or the entered security key does not match the router.
• Epson ET-2800 “E-10 (network report)”The IP address, subnet mask or default gateway setup needs checking.
• Epson ET-2850 product does not turn on or off2 causes in the manual. First: the power cord is loose, or the power button was not held long enough.
• Epson ET-2850 paper does not feed or several sheets feed at once4 causes in the manual. First: paper does not feed for printing.
• Epson ET-2850 paper does not eject fully or comes out wrinkled3 causes in the manual. First: the wrong paper size is set, so the paper does not eject fully.
• Epson ET-3850 product does not turn on or off2 causes in the manual. First: the power cord is loose, or the power button was not held long enough.
• Epson ET-3850 noise after filling the ink2 causes in the manual. First: the product charges its print head the first time the tanks are filled. The power light flashes until charging finishes; turning the product off earlier can make it charge improperly and use excess ink the next time.
• Epson ET-3850 paper does not feed or several sheets feed at once5 causes in the manual. First: the cassette or paper settings are wrong.