LG WM6700HBA how to clean the drain pump filter

When a Drainage message appears, the washer drains slowly, and periodically.

You need

Steps

  1. Turn off the washer and unplug the power cord.
WARNING

Opening the drain filter will result in water overflowing if there is water in the drum. Use a bucket if the drum is not completely drained before you open the drain filter.

Marked WARNING by the manufacturer Source: Maintenance: Cleaning the Drain Pump Filter, p. 44

  1. Open the drain pump filter cover.
  2. Unclip the drain hose, take the plug out of it and drain the remaining water.
  3. Turn the pump filter counterclockwise and pull it out.
  4. Clean the pump filter and the opening it sits in.
  5. Put the plug back on the drain hose and reclip the hose.
WARNING

Using the washer without the drain filter or with an incorrectly assembled drain filter may cause leaks or malfunction of the washer.

Marked WARNING by the manufacturer Source: Maintenance: Cleaning the Drain Pump Filter, p. 44

  1. Insert the pump filter and turn it clockwise.
  2. Close the drain pump filter cover.

Source: Maintenance: Cleaning the Drain Pump Filter Source: Maintenance: Cleaning the Drain Pump Filter, pp. 44-45

Used for

Other WM6700HBA procedures

Sources

  1. Owner's Manual, Washing Machine WM6700H*A / WM5700H*A. LG Electronics Inc. Document MFL70701247, revision Rev.06, 2026-01-23, 68 pages, en-US. gscs-b2c.lge.com. Listed on the manufacturer's support page. Retrieved 12 November 2026.

Page numbers are the numbers printed in the manual. Where this page and the manual differ, follow the manual.

Applies to
WM6700HBA, WM5700HVA. United States and Canada.
Source
Owner's Manual, Washing Machine WM6700H*A / WM5700H*A, MFL70701247 revision Rev.06, 2026-01-23
Last verified
Handbook
LG WM6700HBA / WM5700HVA front-load washer with ezDispense in Washers; all LG handbooks