LG WM6700HBA how to clean the water inlet filters

When a Water supply message appears or the washer fills slowly.

You need

Steps

WARNING

Operating the washer with these filters removed could cause a valve to open continuously, resulting in flooding and/or property damage.

Marked WARNING by the manufacturer Source: Maintenance: Cleaning the Water Inlet Filters, p. 43

  1. Turn off the washer and unplug the power cord.
  2. Turn off the hot and cold water faucets.
  3. Unscrew the hot and cold hoses from the back of the washer.
  4. Pull each filter out of its water valve with pliers.
  5. Take out foreign objects and soak the filters in white vinegar or lime scale remover, following the remover maker's instructions and without damaging the filters.
  6. Rinse the filters well and press them back in.
  7. Run several gallons of water through each hose into a bucket or drain, faucet wide open if possible, then reattach the hoses.

Source: Maintenance: Cleaning the Water Inlet Filters Source: Maintenance: Cleaning the Water Inlet Filters, pp. 43-44

Used for

Other WM6700HBA procedures

Sources

  1. Owner's Manual, Washing Machine WM6700H*A / WM5700H*A. LG Electronics Inc. Document MFL70701247, revision Rev.06, 2026-01-23, 68 pages, en-US. gscs-b2c.lge.com. Listed on the manufacturer's support page. Retrieved 12 November 2026.

Page numbers are the numbers printed in the manual. Where this page and the manual differ, follow the manual.

Applies to
WM6700HBA, WM5700HVA. United States and Canada.
Source
Owner's Manual, Washing Machine WM6700H*A / WM5700H*A, MFL70701247 revision Rev.06, 2026-01-23
Last verified
Handbook
LG WM6700HBA / WM5700HVA front-load washer with ezDispense in Washers; all LG handbooks