LG WM6700HBA how to clean the ezDispense reservoirs and dispenser drawer

Each time you refill detergent or softener or change to a new type, when a Check det. Tank or Check soft. Tank message appears, and once or twice a month for the drawer.

You need

Steps

WARNING

Do not spray water inside the washer. Doing so may cause fire or electric shock.

Marked WARNING by the manufacturer Source: Maintenance: Cleaning the ezDispense Drawer, p. 42

  1. Turn off the washer and unplug the power cord.
  2. Pull the dispenser drawer out until it stops, press the disengage button and remove the drawer completely.
  3. Take the ezDispense reservoirs out of the drawer and open their lids.
  4. Rinse the drawer and the inserts in warm water to dissolve detergent or softener scale. Use a soft cloth or brush and no soap.
  5. Wipe the outside of the reservoirs and inserts with warm water. If detergent or softener has hardened inside a reservoir, take off its cover and clean the inside with warm water, using a soft cloth or brush and no soap.
  6. Close the reservoir covers firmly and dry everything with a towel.
  7. Reassemble the reservoirs and put the drawer back.

Source: Maintenance: Cleaning the ezDispense Drawer Source: Maintenance: Cleaning the ezDispense Drawer, pp. 42-43

Used for

Other WM6700HBA procedures

Sources

  1. Owner's Manual, Washing Machine WM6700H*A / WM5700H*A. LG Electronics Inc. Document MFL70701247, revision Rev.06, 2026-01-23, 68 pages, en-US. gscs-b2c.lge.com. Listed on the manufacturer's support page. Retrieved 12 November 2026.

Page numbers are the numbers printed in the manual. Where this page and the manual differ, follow the manual.

Applies to
WM6700HBA, WM5700HVA. United States and Canada.
Source
Owner's Manual, Washing Machine WM6700H*A / WM5700H*A, MFL70701247 revision Rev.06, 2026-01-23
Last verified
Handbook
LG WM6700HBA / WM5700HVA front-load washer with ezDispense in Washers; all LG handbooks