LG WM6700HBA how to level the washer

When the washer vibrates or rocks during spin.

Steps

CAUTION

Using the washer without leveling it may cause excess vibration and noise, leading to a washer malfunction.

Marked CAUTION by the manufacturer Source: Installation: Leveling the Washer, p. 14

  1. Make sure the floor is clean and dry, and that the slope under the washer is no more than 1 inch.
  2. Turn all four leveling feet in the same direction to raise the washer, or the other direction to lower it. Extend them only as far as needed.
  3. Push or rock the top edges of the washer gently. If it rocks, adjust the feet again.
  4. Turn the locknuts counterclockwise and tighten them against the washer.

Source: Installation: Leveling the Washer Source: Installation: Leveling the Washer, pp. 14-15

Used for

Other WM6700HBA procedures

Sources

  1. Owner's Manual, Washing Machine WM6700H*A / WM5700H*A. LG Electronics Inc. Document MFL70701247, revision Rev.06, 2026-01-23, 68 pages, en-US. gscs-b2c.lge.com. Listed on the manufacturer's support page. Retrieved 12 November 2026.

Page numbers are the numbers printed in the manual. Where this page and the manual differ, follow the manual.

Applies to
WM6700HBA, WM5700HVA. United States and Canada.
Source
Owner's Manual, Washing Machine WM6700H*A / WM5700H*A, MFL70701247 revision Rev.06, 2026-01-23
Last verified
Handbook
LG WM6700HBA / WM5700HVA front-load washer with ezDispense in Washers; all LG handbooks