eufy T2108 how to clean the rolling brush
Once a week, or when the rolling brush does not rotate or four beeps sound with a solid red light.
You need
- Cleaning tool supplied with RoboVac or a vacuum cleaner
Steps
- Pull the release tabs to unlock the brush guard.
- Lift the rolling brush out.
- Clean the rolling brush with the provided cleaning tool or a vacuum cleaner.
- Insert the fixed, protruding end of the rolling brush first and click it into place.
- Press down to snap the brush guard into place.
Source: Cleaning and Maintenance: Clean the Rolling Brush Source: Cleaning and Maintenance: Clean the Rolling Brush, p. 20
Used for
- Solid red: RoboVac has an error. The number of beeps identifies it: one, two, three or four beeps.
- The rolling brush does not rotate
Other T2108 procedures
- How to restart RoboVac with the main power switchWhen RoboVac cannot be activated or stops working suddenly and the other checks in the troubleshooting table did not help.
- How to charge RoboVacBefore first use, after a four-beep low-power error, or when RoboVac does not dock by itself.
- How to clean the dust collector and filtersAfter each use for the dust collector and once a week for the filters.
- How to clean the side brushesOnce a month, or after two beeps with a solid red light.
- How to replace the side brushesEvery 3 to 6 months, or when a side brush is bent, damaged or visibly worn.
- How to clean the sensors and charging pinsOnce a month, or when RoboVac cannot charge, cannot return to the Charging Base or moves abnormally.
- How to clean the swivel wheelOnce a month and as needed, when hair or dust is caught in the swivel wheel.
Sources
- Owner's Manual, RoboVac T2108/T2109/T2110. Anker Innovations Limited. Document 51005001324, revision V01, 28 pages, en. service.eufy.com. Listed on the manufacturer's support page. Retrieved 13 November 2026.
Page numbers are the numbers printed in the manual. Where this page and the manual differ, follow the manual.