eufy T2108 how to charge RoboVac
Before first use, after a four-beep low-power error, or when RoboVac does not dock by itself.
Steps
- Place the Charging Base on a hard, level surface against a wall.
- Remove objects within 3 ft/1 m of the left and right side and within 6 ft/2 m of the front of the Charging Base.
- Connect the round connector of the adapter to the power socket on the Charging Base and plug the other end into a wall outlet. The Charging Base indicator lights solid white.
- Align the charging pins on RoboVac with the charging pins on the base, or press the return button on the remote control.
Source: Using Your RoboVac: Preparation; Charge Your RoboVac Source: Using Your RoboVac: Preparation; Charge Your RoboVac, pp. 11-13
Used for
- Flashing red: RoboVac has an error. The number of beeps identifies it: two beeps, three beeps or four beeps.
- RoboVac cannot be activated
- RoboVac will not start a scheduled cleaning
Other T2108 procedures
- How to restart RoboVac with the main power switchWhen RoboVac cannot be activated or stops working suddenly and the other checks in the troubleshooting table did not help.
- How to clean the dust collector and filtersAfter each use for the dust collector and once a week for the filters.
- How to clean the rolling brushOnce a week, or when the rolling brush does not rotate or four beeps sound with a solid red light.
- How to clean the side brushesOnce a month, or after two beeps with a solid red light.
- How to replace the side brushesEvery 3 to 6 months, or when a side brush is bent, damaged or visibly worn.
- How to clean the sensors and charging pinsOnce a month, or when RoboVac cannot charge, cannot return to the Charging Base or moves abnormally.
- How to clean the swivel wheelOnce a month and as needed, when hair or dust is caught in the swivel wheel.
Sources
- Owner's Manual, RoboVac T2108/T2109/T2110. Anker Innovations Limited. Document 51005001324, revision V01, 28 pages, en. service.eufy.com. Listed on the manufacturer's support page. Retrieved 13 November 2026.
Page numbers are the numbers printed in the manual. Where this page and the manual differ, follow the manual.