Dreame D10 Plus Gen 2 robot vacuum and mop
- Category
- Robot vacuums
- Model number
- D10 Plus Gen 2, RLD32GD, RCDD0202
- Region
- Europe
- Manual
- R2423A revision A03
- Verified
- Solid white
- Blinking orange
- Breathing white
- Wi-Fi indicator blinking slowly
- Wi-Fi indicator blinking quickly
- Wi-Fi indicator on
- Base station solid white
- Base station breathing white
- Base station blinking orange
- The robot will not turn on
- The robot will not charge
- The robot fails to connect to Wi-Fi
- The robot cannot find and return to the base station
- The robot gets stuck in front of the base station
- The robot will not turn off
- The charging speed is slow
- The noise increases while the robot is operating
- The robot moves without following the set route
- The robot misses rooms to be cleaned
- The robot will not resume cleaning after charging
- The base station cannot empty the dust box automatically
- The robot returns to the base station without emptying
- No water, or little water, comes out of the water tank
- How to reset the Wi-Fi connection
- How to restart the robot
- How to clean the mopping module and water tank
- How to clean the main brush
- How to clean the omnidirectional wheel
- How to clean the dust box and filter
- How to replace the dust bag
- How to clean the sensors, charging contacts and auto-empty vents
- How to clean the air duct
Nothing on this page matches. Search all models
Indicator lights
| Indicator | Meaning | Checks |
|---|---|---|
| Solid white | The robot is cleaning, or cleaning is complete. | Checks |
| Blinking orange | The robot reports an error. | Checks |
| Breathing white | The robot is charging and the battery is not low. | Checks |
| Wi-Fi indicator blinking slowly | The robot is waiting to be connected. | Checks |
| Wi-Fi indicator blinking quickly | The robot is connecting. | Checks |
| Wi-Fi indicator on | Wi-Fi is connected. | Checks |
| Base station solid white | The base station is connected to power. | Checks |
| Base station breathing white | The robot is charging on the base station. | Checks |
| Base station blinking orange | The base station has an error. | Checks |
Solid white
Robot status indicator solid white. The robot is cleaning, or cleaning is complete.
Blinking orange
Robot status indicator blinking orange. The robot reports an error.
Breathing white
Robot status indicator breathing white. The robot is charging and the battery is not low.
Wi-Fi indicator blinking slowly
Wi-Fi indicator blinking slowly. The robot is waiting to be connected.
Wi-Fi indicator blinking quickly
Wi-Fi indicator blinking quickly. The robot is connecting.
Wi-Fi indicator on
Wi-Fi indicator on. Wi-Fi is connected.
Base station solid white
Base station status indicator solid white. The base station is connected to power.
Base station breathing white
Base station status indicator breathing white. The robot is charging on the base station.
Base station blinking orange
Base station status indicator blinking orange. The base station has an error.
Problems
- The robot will not turn on2 causes in the manual. First: the battery is low.
- The robot will not charge2 causes in the manual. First: the base station is not connected to power.
- The robot fails to connect to Wi-Fi4 causes in the manual. First: the Wi-Fi network password is incorrect.
- The robot cannot find and return to the base station4 causes in the manual. First: the base station is disconnected from power or was moved when the robot was not on it.
- The robot gets stuck in front of the base station3 causes in the manual. First: obstructions stand within 0.5 m on the left and right sides or within 1.5 m in front of the base station.
- The robot will not turn off2 causes in the manual. First: the robot cannot be turned off when it is charging.
- The charging speed is slow3 causes in the manual. First: A low battery takes about 6 hours to charge fully.
- The noise increases while the robot is operating4 causes in the manual. First: the dust box filter is clogged.
- The robot moves without following the set route2 causes in the manual. First: objects such as power cords and slippers are in the way.
- The robot misses rooms to be cleaned3 causes in the manual. First: A room door is closed.
- The robot will not resume cleaning after chargingDo Not Disturb (DND) mode prevents the robot from resuming cleaning.
- The base station cannot empty the dust box automatically2 causes in the manual. First: the dust bag in the dust tank is full.
- The robot returns to the base station without emptyingDND mode prevents the robot from performing auto-empty tasks.
- No water, or little water, comes out of the water tank4 causes in the manual. First: the water tank is empty.
The robot will not resume cleaning after charging
Do Not Disturb (DND) mode prevents the robot from resuming cleaning. Source: Troubleshooting, p. 26
- Make sure that the robot is not set to the Do Not Disturb (DND) mode.
The robot returns to the base station without emptying
DND mode prevents the robot from performing auto-empty tasks. Source: Troubleshooting, p. 26
- Turn off DND mode in the app, or wait for the DND period to end.
How-to
- How to reset the Wi-Fi connectionWhen the robot cannot connect to the Dreamehome app.
- How to restart the robotWhen the robot stops responding or cannot be turned off.
- How to clean the mopping module and water tankAfter each use; the mop pad needs washing when the robot returns to the base station after mopping.
- How to clean the main brushOnce every 2 weeks.
- How to clean the omnidirectional wheelOnce every month.
- How to clean the dust box and filterFilter once every 2 weeks; dust box as needed.
- How to replace the dust bagEvery 2 to 4 months, or when the dust bag is full.
- How to clean the sensors, charging contacts and auto-empty ventsOnce every month; also when the robot will not charge or cannot find the base station.
- How to clean the air ductWhen the air duct is blocked.
Maintenance
| Task | When | Source |
|---|---|---|
| Wash the mop pad | After each use | Source: Routine Maintenance: Parts, p. 17 |
| Clean the main brush | Once every 2 weeks | Source: Routine Maintenance: Parts, p. 17 |
| Clean the side brush | Once every 2 weeks | Source: Routine Maintenance: Parts, p. 17 |
| Clean the dust box filter | Once every 2 weeks | Source: Routine Maintenance: Parts, p. 17 |
| Clean the base station signaling area, charging contacts and auto-empty vents, the LDS and the robot charging contacts | Once every month | Source: Routine Maintenance: Parts, p. 17 |
| Clean the robot auto-empty vents, bumper, omnidirectional wheel, return-to-base sensor, cliff sensors and bottom | Once every month | Source: Routine Maintenance: Parts, p. 17 |
| Empty the dust box and clean the water tank | As needed | Source: Routine Maintenance: Parts, p. 17 |
| Recharge during long storage | At least once every 3 months | Source: Routine Maintenance: Battery, p. 23 |
Settings
| Setting | Options | Default | Notes | Source |
|---|---|---|---|---|
| Do Not Disturb (DND) mode | On or off in the Dreamehome app; the period can be changed | Off | The robot does not resume cleaning during the DND period, and the power indicator turns off. Scheduled cleaning still runs, and the robot does not perform auto-empty tasks. The default period is 22:00-8:00. | Source: How to Use: Do Not Disturb (DND) Mode; Troubleshooting, pp. 14, 26 |
| Reset button | Press and hold for 3 seconds | Restores the robot to factory settings. The same press disconnects the robot from the Wi-Fi network. | Source: Product Overview: Robot and Sensors; Connecting with Dreamehome App, p. 7 | |
| Child Lock | On or off in the Dreamehome app | Source: Product Overview: Robot, p. 6 | ||
| Auto Resume Cleaning | On or off in the Dreamehome app | After a low-battery return, the robot charges to a suitable level and resumes the unfinished cleaning task. | Source: How to Use: Auto Resume Cleaning, p. 14 | |
| Wi-Fi band | 2.4GHz only | Source: Connecting with Dreamehome App, p. 13 |
Parts and consumables
| Item | Replace or refill | Specification | Source |
|---|---|---|---|
| Mop pad | Every 3 to 6 months | Mop pad on the mopping module. | Source: Routine Maintenance: Parts, p. 17 |
| Main brush | Every 6 to 12 months | Brush under the brush guard. | Source: Routine Maintenance: Parts, p. 17 |
| Side brush | Every 3 to 6 months | Side brush that clips onto the robot. | Source: Routine Maintenance: Parts, p. 17 |
| Dust box filter | Every 3 to 6 months | Filter in the dust box. | Source: Routine Maintenance: Parts, p. 17 |
| Dust bag | Every 2 to 4 months | Bag in the base station dust tank; two bags ship with the robot, one pre-installed. | Source: Routine Maintenance: Parts, p. 17 |
Specifications
Dreame's user manual R2423A (revision A03) covers the D10 Plus Gen 2 robot RLD32GD with the auto-empty base station RCDD0202. A blinking orange status indicator marks a robot error. Source: Product Overview: Robot, p. 6
The base station empties the dust box into a dust bag after cleaning; the robot mops with a water tank and mop pad on a removable module. Source: How to Use: Start Cleaning; Routine Maintenance: Mopping Module, pp. 14, 18
The robot supports 2.4GHz Wi-Fi only. Source: Connecting with Dreamehome App, p. 13
| Robot model | RLD32GD | Source: Specifications, p. 27 |
|---|---|---|
| Base station model | RCDD0202 | Source: Specifications, p. 27 |
| Charging time | Approx. 6 hours | Source: Specifications, p. 27 |
| Rated voltage | 14.4 V | Source: Specifications, p. 27 |
| Base station input | 220-240 V, 50-60 Hz; output 20 V, 1 A | Source: Specifications, p. 27 |
| Base station power | 650 W during dust emptying | Source: Specifications, p. 27 |
| Operating temperature | Above 0°C and below 40°C | Source: Safety Information: Usage Restrictions, p. 1 |
| Threshold height | The robot cannot climb a threshold higher than 2 cm | Source: Troubleshooting, p. 25 |
Recalls
No exact-model match for D10 Plus Gen 2 in the U.S. Consumer Product Safety Commission recall database, checked . Recalls can name model families, so also check current recalls for Dreame.
Service contact
Dreame support, global.dreametech.com. Worldwide. Source: Troubleshooting, p. 26
Sources
- User Manual, Dreame D10 Plus Gen 2 (R2423A, EN/DE/FR/IT/ES/PL/NL/NO/SV/HE/AR/PT). Dreame Trading (Tianjin) Co., Ltd. Document R2423A, revision A03, 115 pages, en. global.dreametech.com. Listed on the manufacturer's support page. Retrieved 13 November 2026.
Page numbers are the numbers printed in the manual. Where this page and the manual differ, follow the manual.
All Dreame handbooks. Report an error to hello@modelhandbook.com.