Dreame D10 Plus Gen 2 how to clean the sensors, charging contacts and auto-empty vents
Once every month; also when the robot will not charge or cannot find the base station.
Steps
- Wipe the LDS, the return-to-base sensor, the bumper and the cliff sensors with a soft, dry cloth.
- Wipe the charging contacts and the signaling area of the base station with a soft, dry cloth.
- Wipe the auto-empty vents of the robot and the base station with a soft, dry cloth.
A wet cloth can damage sensitive elements in the robot and the base station.
Source: Routine Maintenance: Robot Sensors; Charging Contacts and Signaling Area Source: Routine Maintenance: Robot Sensors; Charging Contacts and Signaling Area, p. 22
Used for
- The robot will not charge
- The robot cannot find and return to the base station
- The charging speed is slow
- The base station cannot empty the dust box automatically
Other D10 Plus Gen 2 procedures
- How to reset the Wi-Fi connectionWhen the robot cannot connect to the Dreamehome app.
- How to restart the robotWhen the robot stops responding or cannot be turned off.
- How to clean the mopping module and water tankAfter each use; the mop pad needs washing when the robot returns to the base station after mopping.
- How to clean the main brushOnce every 2 weeks.
- How to clean the omnidirectional wheelOnce every month.
- How to clean the dust box and filterFilter once every 2 weeks; dust box as needed.
- How to replace the dust bagEvery 2 to 4 months, or when the dust bag is full.
- How to clean the air ductWhen the air duct is blocked.
Sources
- User Manual, Dreame D10 Plus Gen 2 (R2423A, EN/DE/FR/IT/ES/PL/NL/NO/SV/HE/AR/PT). Dreame Trading (Tianjin) Co., Ltd. Document R2423A, revision A03, 115 pages, en. global.dreametech.com. Listed on the manufacturer's support page. Retrieved 13 November 2026.
Page numbers are the numbers printed in the manual. Where this page and the manual differ, follow the manual.