Dreame D10 Plus Gen 2 how to clean the mopping module and water tank
After each use; the mop pad needs washing when the robot returns to the base station after mopping.
Steps
- Slide the two release clips on the side of the water tank, remove the mopping module and pull the mop pad off it.
- Pour out the water in the tank, clean the tank with water only and let it air dry before reinstalling. Do not expose the tank directly to sunlight.
- Clean the mop pad with water only and let it air dry before reinstalling. Keep dirty water from flowing back into the water outlet.
- If the water flow is slow or uneven, clean the air hole in the cover of the water tank.
Source: How to Use: Use Mopping Function; Routine Maintenance: Mopping Module Source: How to Use: Use Mopping Function; Routine Maintenance: Mopping Module, pp. 16, 18
Used for
Other D10 Plus Gen 2 procedures
- How to reset the Wi-Fi connectionWhen the robot cannot connect to the Dreamehome app.
- How to restart the robotWhen the robot stops responding or cannot be turned off.
- How to clean the main brushOnce every 2 weeks.
- How to clean the omnidirectional wheelOnce every month.
- How to clean the dust box and filterFilter once every 2 weeks; dust box as needed.
- How to replace the dust bagEvery 2 to 4 months, or when the dust bag is full.
- How to clean the sensors, charging contacts and auto-empty ventsOnce every month; also when the robot will not charge or cannot find the base station.
- How to clean the air ductWhen the air duct is blocked.
Sources
- User Manual, Dreame D10 Plus Gen 2 (R2423A, EN/DE/FR/IT/ES/PL/NL/NO/SV/HE/AR/PT). Dreame Trading (Tianjin) Co., Ltd. Document R2423A, revision A03, 115 pages, en. global.dreametech.com. Listed on the manufacturer's support page. Retrieved 13 November 2026.
Page numbers are the numbers printed in the manual. Where this page and the manual differ, follow the manual.