Dreame d10 plus reset wifi
When the robot cannot connect to the Dreamehome app.
Steps
- Open the Dreamehome app, tap the add-device icon in the upper right corner and scan the same QR code on the robot again to add the device.
- Follow the prompts to finish the Wi-Fi connection.
Only 2.4GHz Wi-Fi is supported. To disconnect the device from the Wi-Fi network, press and hold the Reset button on the robot for 3 seconds; the same press restores the robot to factory settings.
Source: Product Overview: Robot and Sensors; Connecting with Dreamehome App Source: Product Overview: Robot and Sensors; Connecting with Dreamehome App, pp. 7, 13
Other D10 Plus Gen 2 procedures
- How to restart the robotWhen the robot stops responding or cannot be turned off.
- How to clean the mopping module and water tankAfter each use; the mop pad needs washing when the robot returns to the base station after mopping.
- How to clean the main brushOnce every 2 weeks.
- How to clean the omnidirectional wheelOnce every month.
- How to clean the dust box and filterFilter once every 2 weeks; dust box as needed.
- How to replace the dust bagEvery 2 to 4 months, or when the dust bag is full.
- How to clean the sensors, charging contacts and auto-empty ventsOnce every month; also when the robot will not charge or cannot find the base station.
- How to clean the air ductWhen the air duct is blocked.
Sources
- User Manual, Dreame D10 Plus Gen 2 (R2423A, EN/DE/FR/IT/ES/PL/NL/NO/SV/HE/AR/PT). Dreame Trading (Tianjin) Co., Ltd. Document R2423A, revision A03, 115 pages, en. global.dreametech.com. Listed on the manufacturer's support page. Retrieved 13 November 2026.
Page numbers are the numbers printed in the manual. Where this page and the manual differ, follow the manual.