eufy T2108 roboVac cannot be activated

Cause 1 of 3The main power switch is not ON, or the battery is not fully charged. Source: Troubleshooting: Frequently asked questions, p. 23

First checkSet the main power switch on the bottom of RoboVac to ON.

Causes and checks

  1. The main power switch is not ON, or the battery is not fully charged. Source: Troubleshooting: Frequently asked questions, p. 23

    1. Set the main power switch on the bottom of RoboVac to ON.
    2. Charge the battery fully. See Charge RoboVac.
  2. The remote control has weak batteries, or it is more than 16 ft/5 m from RoboVac. Source: Troubleshooting: Frequently asked questions, p. 23

    1. Replace the 2 AAA batteries in the remote control.
    2. Keep the remote control within 16 ft/5 m of RoboVac.
  3. The checks above did not help. Source: Troubleshooting: Frequently asked questions, p. 23

    1. Turn off the main power switch, then turn it back on. See Restart RoboVac with the main power switch.

Service

If the checks above do not clear it, contact eufy support, eufylife.com. Worldwide. Source: Cover, p. 1

Other T2108 problems

Sources

  1. Owner's Manual, RoboVac T2108/T2109/T2110. Anker Innovations Limited. Document 51005001324, revision V01, 28 pages, en. service.eufy.com. Listed on the manufacturer's support page. Retrieved 13 November 2026.

Page numbers are the numbers printed in the manual. Where this page and the manual differ, follow the manual.

Applies to
T2108, T2109, T2110. Worldwide.
Source
Owner's Manual, RoboVac T2108/T2109/T2110, 51005001324 revision V01
Last verified
Handbook
eufy RoboVac 11S robot vacuum in Robot vacuums; all eufy handbooks