eufy T2108 roboVac stops working suddenly
Cause 1 of 3RoboVac is trapped or stuck on an obstacle. Source: Troubleshooting: Frequently asked questions, p. 23
First checkCheck whether RoboVac is trapped or stuck.
Causes and checks
RoboVac is trapped or stuck on an obstacle. Source: Troubleshooting: Frequently asked questions, p. 23
- Check whether RoboVac is trapped or stuck.
The battery level is too low. Source: Troubleshooting: Frequently asked questions, p. 23
- Check the battery level.
The checks above did not help. Source: Troubleshooting: Frequently asked questions, p. 23
- Turn off the main power switch, wait 2 seconds, then turn it back on. See Restart RoboVac with the main power switch.
All 3 causes checked. Contact eufy support.
Service
If the checks above do not clear it, contact eufy support, eufylife.com. Worldwide. Source: Cover, p. 1
Other T2108 problems
- RoboVac cannot be activated3 causes in the manual. First: the main power switch is not ON, or the battery is not fully charged.
- The remote control does not work2 causes in the manual. First: the remote control batteries are weak.
- RoboVac will not start a scheduled cleaning3 causes in the manual. First: the main power switch on the bottom is off.
- Suction power is weak3 causes in the manual. First: something blocks the suction inlet.
- RoboVac cannot be charged3 causes in the manual. First: the indicator on the Charging Base does not light up.
- RoboVac cannot return to the Charging Base3 causes in the manual. First: objects stand close to the Charging Base.
- The rolling brush does not rotate2 causes in the manual. First: hair or debris is wrapped around the rolling brush.
- RoboVac moves or travels in an abnormal path2 causes in the manual. First: the sensors are dirty.
Sources
- Owner's Manual, RoboVac T2108/T2109/T2110. Anker Innovations Limited. Document 51005001324, revision V01, 28 pages, en. service.eufy.com. Listed on the manufacturer's support page. Retrieved 13 November 2026.
Page numbers are the numbers printed in the manual. Where this page and the manual differ, follow the manual.