HP OfficeJet Pro 9010e series printer does not connect to the wireless network
CauseThe network settings need to be reset, or the network test shows a failure. Source: Fix wireless connection, pp. 172-173
First checkRestore the network settings and reconnect the printer.
Causes and checks
The network settings need to be reset, or the network test shows a failure. Source: Fix wireless connection, pp. 172-173
- Restore the network settings and reconnect the printer. See Restore the printer to the original network settings.
- Print the Wireless Test Report or the Network Configuration Page. See Print the Wireless Test Report.
- Check the top of the wireless test report to see if something failed during the test.
- See the DIAGNOSTICS RESULTS section for all tests that were performed.
- In the CURRENT CONFIGURATION section, check the Network Name (SSID) and make sure the printer is connected to the same network as your computer or mobile devices.
- Use an HP online troubleshooting tool to solve printer issues.
Service
If the checks above do not clear it, contact HP support, hp.com/support. Chat with an HP support agent or the HP Virtual Agent online, or call an HP support agent. Free for in-warranty customers. Source: Contact HP, p. 184
Other OfficeJet Pro 9010e series problems
- Paper is not picked up from a trayPaper is not loaded correctly, the guides are misaligned, or the paper is curled.
- Pages are skewingThe paper is not aligned to the paper-width guides, paper was loaded during printing, or the rear access door is open.
- Multiple pages are being picked upThe guides are loose, the stack is too tall, or the tray is overloaded.
- Document feeder picks up multiple pages or does not pick up plain paperThe document feeder rollers or separator pad carry residue.
- Print carriage is blockedPaper or another object blocks the print carriage.
- HP+ printer does not print2 causes in the manual. First: the printer is not connected to the Internet.
- Page does not print (unable to print)The printer is off, out of paper, paused, offline or stuck on a print job.
- Printer does not turn on or has a power problemThe power cord is loose or the printer needs a power reset.
- Print quality is poorCartridges, settings, alignment or printhead condition affect print quality.
- Printhead alignment fails2 causes in the manual. First: colored paper is loaded in the input tray.
- Copy or scan does not work correctly2 causes in the manual. First: the scanner glass and lid backing are not clean.
- The printer cannot receive faxes, but can send faxes3 causes in the manual. First: distinctive Ring, Auto Answer or other equipment on the line prevents reception.
- The printer cannot send faxes, but can receive faxes2 causes in the manual. First: the printer dials too fast or too soon.
- The printer is having problems sending and receiving faxes3 causes in the manual. First: the printer is off, still starting up, or has an error.
- Fax tones are recorded on my answering machineThe answering machine is not connected directly to the printer, or both devices answer after the same number of rings.
- The computer cannot receive faxes (HP Digital Fax)The computer selected to receive faxes is off, or HP Digital Fax is not activated.
- Wi-Fi Direct connection does not workWi-Fi Direct is off, or the device is not connected to the printer's Wi-Fi Direct name.
- Ethernet connection does not workThe network, the cable, or security software blocks the connection.
- Web Services do not workThe printer is not connected to the Internet, Web Services is off, or proxy settings are wrong.
- Embedded web server cannot be openedThe network setup, the computer, the web browser or the printer IP address is at fault.
- The printer shuts down unexpectedlyThe power connection is loose.
- Printer turns itself off after inactivityAuto-Off is enabled.
Sources
- User Guide, HP OfficeJet Pro 9010e All-in-One series. HP Development Company, L.P. Document c06940372, revision ENWW (PDF created 2021-02-26), 219 pages, en. h10032.www1.hp.com (PDF). Retrieved 13 November 2026.
Page numbers are the numbers printed in the manual. Where this page and the manual differ, follow the manual.