HP M234dw printer feeds more than one sheet at a time
CauseStack condition, paper type or overfilled tray. Source: Printer does not pick up paper or misfeeds: The product picks up multiple sheets of paper, p. 66
First checkTake the stack out, turn it 180 degrees, flip it and put it back.
Causes and checks
Stack condition, paper type or overfilled tray. Source: Printer does not pick up paper or misfeeds: The product picks up multiple sheets of paper, p. 66
- Take the stack out, turn it 180 degrees, flip it and put it back.
- Use paper that meets HP specifications for this product.
- Swap wrinkled, folded or damaged sheets, or paper from another package.
- Straighten the stack and put back fewer sheets if the tray was overfilled.
- Move the paper guides to the indentation for that paper size.
- Confirm the printing environment is within the recommended specifications.
Service
If the checks above do not clear it, contact HP Customer Support, hp.com/support. Telephone numbers by country are on the flyer in the box or at www.hp.com/support. Source: Customer support, p. 125
Other M234dw problems
- Printer does not pick up paperTray settings, paper or the pickup roller.
- Frequent or recurring paper jamsFrequent or recurring paper jams.
- Paper jam5 causes in the manual. First: er/04: jam in the input tray or printer base.
- Whole page prints light or fadedWhole page prints light or faded
- Gray background or darker print than expectedGray background or darker print than expected
- Pages come out completely blankPages come out completely blank
- Whole page prints blackWhole page prints black
- Repeating bands down the page in filled areasRepeating bands down the page in filled areas
- Vertical streaks on the printed page2 causes in the manual. First: light vertical streaks in filled areas only.
- Shadow copies of the image repeat down the pageShadow copies of the image repeat down the page
- Toner smears or rubs off at the page edgesToner smears or rubs off at the page edges
- Printout is crooked or not centeredPrintout is crooked or not centered
- Paper comes out curled2 causes in the manual. First: positive curl: edges curl toward the printed side.
- Output stacks unevenly or falls off the trayOutput stacks unevenly or falls off the tray
- Background shading, dark vertical bands or repeating horizontal bandingBackground shading, dark vertical bands or repeating horizontal banding
- Toner specks, spatter, smears, lines or repeating marksToner specks, spatter, smears, lines or repeating marks
- Copies or scans show smudges, specks or poor quality4 causes in the manual. First: dirt on the scanner glass or the white backing under the lid.
- Printer will not connect to Wi-FiPower, radio, SSID or security information.
- Printer does not print after wireless setup is done2 causes in the manual. First: printer state, firewall, network or computer.
- Wireless connection broke after moving the router or printerThe printer and the computer ended up on different networks.
- Cannot add more devices over Wi-Fi DirectRange, user limit, firewall or network.
- Wireless printer drops while connected to a VPNA computer cannot normally join a VPN and other networks together.
- Wi-Fi network is missing from the wireless networks listRouter power, hidden network, range or stale list.
- Wireless network is not functioningThe network lost communication, or the devices use different networks.
- Ethernet connection is not workingNetwork, cable, security software or driver.
Sources
- User Guide, HP LaserJet MFP M232-M237 series. HP Development Company, L.P. Document c06759742, revision UG_EN (PDF created 2020-12-02), 154 pages, en. h10032.www1.hp.com (PDF). Retrieved 13 November 2026.
Page numbers are the numbers printed in the manual. Where this page and the manual differ, follow the manual.