LG LSIL6336XE electric induction range
- Category
- Ranges and ovens
- Model number
- LSIL6336XE
- Region
- United States
- Verified
- Error F-3
- Error F-9
- Sb
- Loc
- CLEAN and door flash
- Error Hot
- LED bar fluctuates
- End
- Flashing clock
- A cooking element does not heat or the pan does not heat
- The appliance does not operate
- The oven will not work
- Oven temperature is too hot or too cold
- Food does not bake or roast properly
- Food does not broil properly
- Oven will not Self Clean (some models)
- The oven door does not open after a Self Clean cycle (some models)
- The oven is not clean after a Self Clean cycle (some models)
- Excessive smoking during a Self Clean cycle (some models)
- The oven smokes excessively during broiling
- Oven light does not work
- Oven racks are difficult to slide (some models)
- Function buttons do not work
- Scratches or abrasions on the cooktop surface
- How to set the clock
- How to turn Control Lock on or off
- How to calibrate the oven temperature
- How to turn Convection Auto Conversion on or off
- How to set Sabbath mode
- How to run EasyClean
- How to run Self Clean
- How to replace the oven light
- How to check how well your cookware heats on an induction element
- How to adjust the knob lock on a cooktop knob
- How to clean the glass-ceramic cooktop
Nothing on this page matches. Search all models
Error codes
| Code | Meaning | Checks |
|---|---|---|
| F-3 | Key short error. | Checks |
| F-9 | Oven not heating. | Checks |
| Sb | Sabbath mode is on. It is not an error code, and all function buttons are inactive. | Checks |
| Loc | The oven is locked by Control Lock. | Checks |
| CLEAN and door flash | Self Clean was selected while the oven door was open. | Checks |
| Hot | The oven cavity is above 150 °F (65 °C), so EasyClean will not start until the oven cools. | Checks |
| LED bar fluctuates | The cookware is too small for the element, or the element has not detected a suitable pan. An element with no cookware turns itself off after one minute. | Checks |
| End | The set timer has run out. The indicator tones sound every 15 seconds until Timer On/Off is pressed. | Checks |
| Flashing clock | The range has just been plugged in or lost power. | Checks |
F-3
The oven control beeps and F-3 shows. Key short error.
- Turn off the oven function you are using to clear the display and stop the beeping.
- Reprogram the oven.
- If the fault returns, record the fault number and contact a service agent.
Source Source: Troubleshooting: Before Calling for Service, p. 76
F-9
The oven control beeps and F-9 shows. Oven not heating.
- Turn off the oven function you are using to clear the display and stop the beeping.
- Reprogram the oven.
- If the fault returns, record the fault number and contact a service agent.
Source Source: Troubleshooting: Before Calling for Service, p. 76
Sb
sb, Sb, S6 or 56 shows in the oven display. Sabbath mode is on. It is not an error code, and all function buttons are inactive.
- Press and hold Settings for 3 seconds, or until sb disappears from the display. See Set Sabbath mode.
Source Source: Troubleshooting: Before Calling for Service, pp. 74, 76
Loc
Loc appears in the display when you want to cook. The oven is locked by Control Lock.
- Deactivate Control Lock. See Turn Control Lock on or off.
Source Source: Troubleshooting: Before Calling for Service, p. 77
CLEAN and door flash
CLEAN and the door symbol flash in the display (some models). Self Clean was selected while the oven door was open.
- Close the oven door.
Source Source: Troubleshooting: Before Calling for Service, p. 76
Hot
Hot appears in the display when you select EasyClean. The oven cavity is above 150 °F (65 °C), so EasyClean will not start until the oven cools.
- Let the oven cool, then start EasyClean again. See Run EasyClean.
LED bar fluctuates
The cooking element LED bar fluctuates and the pan does not heat. The cookware is too small for the element, or the element has not detected a suitable pan. An element with no cookware turns itself off after one minute.
- Use magnetic cookware that fits the element, is centered, has a flat bottom and rests fully on the glass. See Check how well your cookware heats on an induction element.
Source Source: Operation: Pan Sensing; Cookware Placement, pp. 34-36
End
End shows in the display. The set timer has run out. The indicator tones sound every 15 seconds until Timer On/Off is pressed.
- Press Timer On/Off to stop the tones.
Flashing clock
The clock colon or time flashes. The range has just been plugged in or lost power.
- Reset the clock or press any button to stop the flashing. See Set the clock.
Source Source: Troubleshooting: Before Calling for Service, p. 76
Problems
- A cooking element does not heat or the pan does not heat3 causes in the manual. First: the cookware base is not magnetic.
- The appliance does not operate4 causes in the manual. First: the cord is not plugged in correctly.
- The oven will not work4 causes in the manual. First: the plug is not fully inserted in the outlet.
- Oven temperature is too hot or too coldThe oven sensor needs to be adjusted.
- Food does not bake or roast properly4 causes in the manual. First: the oven controls are set incorrectly.
- Food does not broil properly5 causes in the manual. First: the oven controls are set incorrectly.
- Oven will not Self Clean (some models)3 causes in the manual. First: the oven temperature is too high to set a Self Clean operation.
- The oven door does not open after a Self Clean cycle (some models)2 causes in the manual. First: the oven is too hot.
- The oven is not clean after a Self Clean cycle (some models)The oven controls were set incorrectly, or the oven was heavily soiled.
- Excessive smoking during a Self Clean cycle (some models)The oven has excessive soil.
- The oven smokes excessively during broiling5 causes in the manual. First: the control is not set properly.
- Oven light does not workIt is time to replace the lamp, or the lamp is loose.
- Oven racks are difficult to slide (some models)2 causes in the manual. First: the shiny, silver-colored racks were cleaned in a Self Clean cycle.
- Function buttons do not work2 causes in the manual. First: control Lock or Lockout is on.
- Scratches or abrasions on the cooktop surface3 causes in the manual. First: coarse particles such as salt or sand are between the cookware and the cooktop.
Oven temperature is too hot or too cold
The oven sensor needs to be adjusted. Source: Troubleshooting: Before Calling for Service, p. 75
- Calibrate the displayed oven temperature. See Calibrate the oven temperature.
The oven is not clean after a Self Clean cycle (some models)
The oven controls were set incorrectly, or the oven was heavily soiled. Source: Troubleshooting: Before Calling for Service, p. 77
- Follow the Self Clean section. See Run Self Clean.
- Clean up heavy spillovers before starting the clean cycle; a heavily soiled oven may need to self-clean again or for a longer time.
Excessive smoking during a Self Clean cycle (some models)
The oven has excessive soil. Source: Troubleshooting: Before Calling for Service, p. 75
- Turn off the Self Clean function.
- Open the windows to clear the smoke from the room.
- Wait until Self Clean is cancelled, wipe up the excess soil and set the cycle again.
Oven light does not work
It is time to replace the lamp, or the lamp is loose. Source: Troubleshooting: Before Calling for Service, p. 77
- Replace or tighten the lamp. See Replace the oven light.
Buzzing or fan noise from the cooktop
Induction cooking creates a slight buzz, some cookware buzzes, especially when cold or in Boost mode, and a cooling fan can run during and after cooktop use. Source: Operation: Noises during Cooktop Operation, p. 33
A chime sounds when a surface element is turned on
A chime sounds when any cooktop burner is activated to show the cooktop is in use. Source: Troubleshooting: Before Calling for Service, p. 77
The convection fan stops during Convection Bake
The fan stops during a convection bake cycle to allow more even heating, and stops when the door is opened until it is closed. Source: Troubleshooting: Before Calling for Service, p. 77
Cooking elements cycle on and off
Elements cycle on and off to hold the selected setting. A surface unit also stops glowing when changed to a lower setting while it is still hot. Source: Troubleshooting: Before Calling for Service, p. 76
Clicking noise from the back of the oven
The range holds the oven temperature more tightly, so the heating elements click on and off more often. Source: Troubleshooting: FAQs, p. 71
Burning or oily odor from the vent
A new oven gives off odor at first. A Self Clean cycle of at least 3 hours speeds this up on models with Self Clean. Source: Troubleshooting: Before Calling for Service, p. 75
How-to
- How to set the clockTo set the time of day. Timed oven functions need the right time.
- How to turn Control Lock on or offTo lock the control panel and oven mode knob, or to clear Loc. The oven door stays unlocked.
- How to calibrate the oven temperatureWhen food is consistently too light or too brown after you follow the recommended temperatures.
- How to turn Convection Auto Conversion on or offTo control whether Conv. Bake and Conv. Roast subtract 25 °F (14 °C) from the recipe temperature you enter.
- How to set Sabbath modeBefore cooking on the Sabbath or a holiday. Sabbath mode works only in Bake.
- How to run EasyCleanTo loosen light soil with water and a 10-minute low-temperature cycle before hand-cleaning.
- How to run Self CleanWhen the oven needs more than EasyClean can remove (some models).
- How to replace the oven lightWhen the oven light does not work.
- How to check how well your cookware heats on an induction elementTo see how efficiently a pan heats on an induction element.
- How to adjust the knob lock on a cooktop knobTo use a cooktop knob without pressing in the side button.
- How to clean the glass-ceramic cooktopTo clean the cooktop after use and to remove burned-on residue.
Maintenance
| Task | Source |
|---|---|
| Clean the cooktop with ceramic cooktop cleaner before first use and daily to keep it looking new | Source: Maintenance: Glass-Ceramic Cooktop, p. 60 |
| Replace a failed oven light lamp | Source: Maintenance: Changing the Oven Light, p. 70 |
| Keep the cooktop knobs clean; soil or foreign objects on them can interfere with the button | Source: Operation: Using the Cooking Elements, p. 37 |
| Vacuum the vent louvers with a brush or crevice attachment, and leave the panel covering the range in place | Source: Maintenance, p. 60 |
Settings
| Setting | Options | Default | Notes | Source |
|---|---|---|---|---|
| Hour mode | 12-hour or 24-hour clock | 12-hour | Source: Operation: Setting the Hour Mode, p. 27 | |
| Convection Auto Conversion (Auto) | Enabled or disabled | Subtracts 25 °F (14 °C) from the recipe temperature for Conv. Bake and Conv. Roast | Source: Operation: Setting Convection Auto Conversion, p. 27 | |
| Oven temperature calibration (AdJU) | Up to 35 °F (19 °C) hotter or cooler | Source: Operation: Calibrating the Oven Temperature, p. 28 | ||
| Preheat alarm light (PrE) | On or off | Flashes 5 times, or until the door is opened, when the oven reaches its set temperature | Source: Operation: Turning the Preheat Alarm Light On/Off, p. 28 | |
| Beeper volume (bEEP) | Hi, Lo or OFF | Does not change the preheat alarm volume | Source: Operation: Adjusting the Beeper Volume, p. 28 | |
| Temperature unit (UNit) | Fahrenheit or Celsius | Fahrenheit | Source: Operation: Selecting Fahrenheit or Celsius, p. 28 | |
| Cooktop on alert volume (CtOP) | Hi or OFF | Source: Operation: Adjusting Cooktop On Alert Volume, p. 29 | ||
| Boost power level | Available only right after an element is turned on; the LED bar flashes | Runs for up to 10 minutes, then the element returns to HI | Source: Operation: Using the Cooking Elements, pp. 37-38 |
Parts and consumables
| Item | Replace or refill | Specification | Source |
|---|---|---|---|
| Oven light lamp | – | Standard 40-watt appliance halogen lamp | Source: Maintenance: Changing the Oven Light, p. 70 |
Specifications
Electric range with four induction cooking elements and a 6-inch radiant Warm Zone. The oven has a total capacity of 6.3 cu. ft., with Bake, Convection Bake, Convection Roast, Broil, Air Fry, Air Sous-Vide, a meat probe, EasyClean and Self Clean. Source: Product Overview; Operation: Minimum and Maximum Default Settings, pp. 8, 31
The induction elements need magnetic cookware that fits the element size. The cooktop knobs are pressed in and turned, and each element has a LED bar that shows its power level. Source: Operation: Induction Cookware; Using the Cooking Elements, pp. 34, 37
| Induction cooking elements | Left front 8 inch, 2100 W (3200 W Boost); right front 11 inch, 2400 W (4300 W Boost); left rear and center rear 6 inch, 1300 W (1800 W Boost), all at 240 V | Source: Operation: Cooking Areas, p. 33 |
|---|---|---|
| Radiant Warm Zone | 6 inch, 100 W at 240 V | Source: Operation: Cooking Areas, p. 33 |
| Pan bottom diameter, 8 inch element | 7.5 inch (190 mm) to 9.2 inch (224 mm) | Source: Operation: Minimum and Maximum Pan Size, p. 35 |
| Pan bottom diameter, 11 inch element | 9.5 inch (241 mm) to 11.8 inch (300 mm) | Source: Operation: Minimum and Maximum Pan Size, p. 35 |
| Pan bottom diameter, 6 inch elements | 5.5 inch (140 mm) to 7.0 inch (178 mm) | Source: Operation: Minimum and Maximum Pan Size, p. 35 |
| Oven temperature calibration | Up to 35 °F (19 °C) hotter or cooler; does not affect broiling or Self Clean | Source: Operation: Calibrating the Oven Temperature, p. 28 |
| Self Clean times | 3, 4 or 5 hours; 4 hours by default | Source: Operation: Minimum and Maximum Default Settings, p. 31 |
| Oven light | Standard 40-watt appliance halogen lamp | Source: Maintenance: Changing the Oven Light, p. 70 |
Recalls
No exact-model match for LSIL6336XE in the U.S. Consumer Product Safety Commission recall database, checked . Recalls can name model families, so also check current recalls for LG.
Service contact
LG Customer Information Center: 1-800-243-0000, lg.com/us/support. United States (Canada: 1-888-542-2623). Source: Limited Warranty: To Obtain Warranty Service, p. 83
Sources
- Owner's Manual, Electric Induction Range LSIL6336*E. LG Electronics Inc. Document MFL71878844, revision Rev.02, 2026-08-18, 88 pages, en-US. gscs-b2c.lge.com. Listed on the manufacturer's support page. Retrieved 13 November 2026.
Page numbers are the numbers printed in the manual. Where this page and the manual differ, follow the manual.
All LG handbooks. Report an error to hello@modelhandbook.com.