LG LSIL6336XE how to clean the glass-ceramic cooktop

To clean the cooktop after use and to remove burned-on residue.

Steps

  1. Let the cooking surface cool.
  2. Apply a few drops of ceramic cooktop cleaner directly to the cooktop and rub it over the surface with a paper towel.
  3. Rinse with clear water and wipe the surface dry with a dry cloth or paper towel.
WARNING

To protect hands from burns, always wear oven mitts or use pot holders while using a scraper on the hot cooking surface.

Marked WARNING by the manufacturer Source: Maintenance: Glass-Ceramic Cooktop, p. 60

  1. For burned-on deposits, scrape the warm surface with a metal razor scraper held at about a 30° angle, wearing oven mitts.
  2. When the surface has fully cooled, spread the cleaner over the residue area, leave it for 10 minutes, then rinse and dry.

Sugary spills, melted plastic or foil should be removed immediately with the scraper while the surface is hot, because they can pit the glass. Do not use scrub pads, chlorine bleach or ammonia.

Source: Maintenance: Glass-Ceramic Cooktop Source: Maintenance: Glass-Ceramic Cooktop, pp. 60-62

Used for

Other LSIL6336XE procedures

Sources

  1. Owner's Manual, Electric Induction Range LSIL6336*E. LG Electronics Inc. Document MFL71878844, revision Rev.02, 2026-08-18, 88 pages, en-US. gscs-b2c.lge.com. Listed on the manufacturer's support page. Retrieved 13 November 2026.

Page numbers are the numbers printed in the manual. Where this page and the manual differ, follow the manual.

Applies to
LSIL6336XE. United States.
Source
Owner's Manual, Electric Induction Range LSIL6336*E, MFL71878844 revision Rev.02, 2026-08-18
Last verified
Handbook
LG LSIL6336XE electric induction range in Ranges and ovens; all LG handbooks