LG LSIL6336XE how to set the clock
To set the time of day. Timed oven functions need the right time.
Steps
- Press Clock.
- Enter the time with the number buttons. For 10:30, press 1, 0, 3 and 0.
- Press Start.
The time of day cannot be changed during a timed baking or self-clean cycle. To switch to a 24-hour clock, press Settings once, press 1 to toggle between 12-hour and 24-hour display and press Start.
Source: Operation: Changing Oven Settings: Clock Source: Operation: Changing Oven Settings: Clock, p. 26
Used for
- Flashing clock: The range has just been plugged in or lost power.
Other LSIL6336XE procedures
- How to turn Control Lock on or offTo lock the control panel and oven mode knob, or to clear Loc. The oven door stays unlocked.
- How to calibrate the oven temperatureWhen food is consistently too light or too brown after you follow the recommended temperatures.
- How to turn Convection Auto Conversion on or offTo control whether Conv. Bake and Conv. Roast subtract 25 °F (14 °C) from the recipe temperature you enter.
- How to set Sabbath modeBefore cooking on the Sabbath or a holiday. Sabbath mode works only in Bake.
- How to run EasyCleanTo loosen light soil with water and a 10-minute low-temperature cycle before hand-cleaning.
- How to run Self CleanWhen the oven needs more than EasyClean can remove (some models).
- How to replace the oven lightWhen the oven light does not work.
- How to check how well your cookware heats on an induction elementTo see how efficiently a pan heats on an induction element.
- How to adjust the knob lock on a cooktop knobTo use a cooktop knob without pressing in the side button.
- How to clean the glass-ceramic cooktopTo clean the cooktop after use and to remove burned-on residue.
Sources
- Owner's Manual, Electric Induction Range LSIL6336*E. LG Electronics Inc. Document MFL71878844, revision Rev.02, 2026-08-18, 88 pages, en-US. gscs-b2c.lge.com. Listed on the manufacturer's support page. Retrieved 13 November 2026.
Page numbers are the numbers printed in the manual. Where this page and the manual differ, follow the manual.