De'Longhi ECAM370.95.T how to wash the milk container
Every two days, and when milk does not flow or froths poorly.
Steps
- Remove the lid, the milk spout and the intake tube.
- Turn the froth dial anticlockwise to INSERT and pull it off.
- Wash all parts in hot water with mild washing-up liquid, or in the top basket of a dishwasher. Clear milk residue from the groove under the dial with a toothpick if needed.
- Rinse the dial seat under running water and check the tube and spout are clear.
- Refit the dial at INSERT, the spout, the intake tube and the lid.
Source: 13.10 Cleaning the milk container Source: 13.10 Cleaning the milk container, pp. 15–16
Used for
Other ECAM370.95.T procedures
- How to descale the Dinamica PlusWhen DESCALING NEEDED PRESS OK TO START (~45MIN) appears, or the descale symbol shows on the homepage. Start from the settings menu with DESCALE, or press OK on the message.
- How to set the water hardnessWhen you first set up the machine; the factory setting is level 4 (very hard). A lower correct setting means less frequent descaling.
- How to install or replace the water softener filterWhen REPLACE WATER FILTER PRESS OK TO START appears, every 2 months of use, or after the machine stands unused for 3 weeks with a filter fitted.
- How to clean the infuserAt least once a month, and when INSERT INFUSER ASSEMBLY appears after cleaning.
- How to clean the milk container after useAfter each milk drink, when TURN MILK FROTH ADJUSTMENT DIAL TO CLEAN POSITION appears. When making several milk drinks in a row, clean only after the last one.
Sources
- Instructions for use, Dinamica Plus ECAM370.95.T (English). De'Longhi Appliances S.r.l. Document 5713238071, revision EN-5713238071 (PDF dated 2018-07-06), 2018-07-06, 25 pages, en. library.delonghigroup.com. Listed on the manufacturer's support page. Retrieved 13 November 2026.
Page numbers are the numbers printed in the manual. Where this page and the manual differ, follow the manual.