De'Longhi ECAM370.95.T how to clean the milk container after use
After each milk drink, when TURN MILK FROTH ADJUSTMENT DIAL TO CLEAN POSITION appears. When making several milk drinks in a row, clean only after the last one.
Steps
- Leave the milk container on the machine; it does not need emptying.
- Place a cup under the frothed milk spout.
- Turn the froth dial to CLEAN. Steam and hot water run through the spout and stop by themselves.
- Turn the dial back to a froth setting.
- Remove the milk container and wipe the hot water connection nozzle with a sponge.
Source: 8.4 Cleaning the milk container after use Source: 8.4 Cleaning the milk container after use, p. 12
Used for
- TURN MILK FROTH ADJUSTMENT DIAL TO CLEAN POSITION: Milk was made recently and the milk container tubes need their after-use clean.
- Milk container cleaning symbol: The tubes inside the milk container need cleaning.
Other ECAM370.95.T procedures
- How to descale the Dinamica PlusWhen DESCALING NEEDED PRESS OK TO START (~45MIN) appears, or the descale symbol shows on the homepage. Start from the settings menu with DESCALE, or press OK on the message.
- How to set the water hardnessWhen you first set up the machine; the factory setting is level 4 (very hard). A lower correct setting means less frequent descaling.
- How to install or replace the water softener filterWhen REPLACE WATER FILTER PRESS OK TO START appears, every 2 months of use, or after the machine stands unused for 3 weeks with a filter fitted.
- How to clean the infuserAt least once a month, and when INSERT INFUSER ASSEMBLY appears after cleaning.
- How to wash the milk containerEvery two days, and when milk does not flow or froths poorly.
Sources
- Instructions for use, Dinamica Plus ECAM370.95.T (English). De'Longhi Appliances S.r.l. Document 5713238071, revision EN-5713238071 (PDF dated 2018-07-06), 2018-07-06, 25 pages, en. library.delonghigroup.com. Listed on the manufacturer's support page. Retrieved 13 November 2026.
Page numbers are the numbers printed in the manual. Where this page and the manual differ, follow the manual.