De'Longhi ECAM370.95.T milk has large bubbles, spurts, or has little froth

Cause 1 of 3Milk not cold enough, or not skimmed or semi-skimmed. Source: 19. Troubleshooting, p. 25

First checkUse skimmed or semi-skimmed milk at about 5 °C; if froth is still poor, try another brand.

Causes and checks

  1. Milk not cold enough, or not skimmed or semi-skimmed. Source: 19. Troubleshooting, p. 25

    1. Use skimmed or semi-skimmed milk at about 5 °C; if froth is still poor, try another brand.
  2. Froth dial set wrongly. Source: 8.2 Adjusting the amount of froth, pp. 12, 25

    1. Set the froth dial for the drink: NO FROTH for hot milk (not frothed) and caffelatte, MIN. FROTH for latte macchiato and flat white, MAX. FROTH for cappuccino, cappuccino+, cappuccino mix, espresso macchiato and hot milk (frothed).
  3. Milk container lid, froth dial or hot water nozzle dirty. Source: 19. Troubleshooting, p. 25

    1. Clean the milk container. See Wash the milk container.
    2. Wipe the hot water connection nozzle with a sponge.

Service

If the checks above do not clear it, contact De'Longhi Customer Services, delonghi.com/en/s/ECAM370.95.T. Numbers per country are on the Customer Service sheet supplied with the machine. Source: 1.2 Troubleshooting and repairs, p. 7

Other ECAM370.95.T problems

Sources

  1. Instructions for use, Dinamica Plus ECAM370.95.T (English). De'Longhi Appliances S.r.l. Document 5713238071, revision EN-5713238071 (PDF dated 2018-07-06), 2018-07-06, 25 pages, en. library.delonghigroup.com. Listed on the manufacturer's support page. Retrieved 13 November 2026.

Page numbers are the numbers printed in the manual. Where this page and the manual differ, follow the manual.

Applies to
ECAM370.95.T. Europe and UK (220–240 V).
Source
Instructions for use, Dinamica Plus ECAM370.95.T (English), 5713238071 revision EN-5713238071 (PDF dated 2018-07-06), 2018-07-06
Last verified
Handbook
De'Longhi Dinamica Plus ECAM370.95.T in Coffee and espresso machines; all De'Longhi handbooks