De'Longhi ECAM370.95.T how to install or replace the water softener filter

When REPLACE WATER FILTER PRESS OK TO START appears, every 2 months of use, or after the machine stands unused for 3 weeks with a filter fitted.

You need

Steps

  1. Take the tank and the old filter out, and unpack the new filter.
  2. Open the settings menu, press WATER FILTER and turn the filter's date disc to show the next 2 months. Press OK.
  3. Run tap water into the hole in the filter until water comes out of the side openings for more than a minute. Press OK.
  4. Fill the tank, hold the filter under the water for about ten seconds, tilting and pressing it to release air bubbles. Press OK.
  5. Press the filter into its housing in the tank as far as it goes. Press OK.
  6. Close the tank lid and refit the tank.
  7. Place a 0.5 litre container under the hot water spout and press OK. Delivery stops by itself and the filter is active.

To run without a filter, take it out, then choose WATER FILTER, REMOVE WATER FILTER in the settings menu and confirm.

Source: 16. Water softener filter Source: 16. Water softener filter, pp. 17–18

Used for

Other ECAM370.95.T procedures

Sources

  1. Instructions for use, Dinamica Plus ECAM370.95.T (English). De'Longhi Appliances S.r.l. Document 5713238071, revision EN-5713238071 (PDF dated 2018-07-06), 2018-07-06, 25 pages, en. library.delonghigroup.com. Listed on the manufacturer's support page. Retrieved 13 November 2026.

Page numbers are the numbers printed in the manual. Where this page and the manual differ, follow the manual.

Applies to
ECAM370.95.T. Europe and UK (220–240 V).
Source
Instructions for use, Dinamica Plus ECAM370.95.T (English), 5713238071 revision EN-5713238071 (PDF dated 2018-07-06), 2018-07-06
Last verified
Handbook
De'Longhi Dinamica Plus ECAM370.95.T in Coffee and espresso machines; all De'Longhi handbooks