HP DeskJet 2700e series how to check the estimated ink levels
When you want to know if a cartridge is low before print quality drops.
Steps
- To check on the printer, read the Ink Level icons on the display. The left icon shows the tri-color cartridge and the right icon shows the black cartridge.
- To check in Windows, open the HP printer software and click the Estimated Levels tab.
- To check in HP Smart, open the app and read the estimated ink levels at the right side of the printer image.
Ink level warnings and indicators are estimates. You do not have to replace a cartridge until print quality is unacceptable.
Source: Check estimated ink levels Source: Check estimated ink levels, p. 63
Other DeskJet 2700e series procedures
- How to clear a paper jam from the input trayWhen the E4 code shows or paper is stuck at the input tray. Start with this area before the other areas.
- How to clear a paper jam from the output trayWhen paper is stuck in the output tray area.
- How to clear a paper jam from the cartridge access areaWhen the carriage is blocked or paper is stuck in the cartridge access area.
- How to clear a paper jam from underneath the printerWhen a jam is not reachable from the input tray, output tray or cartridge access area.
- How to load paper in the input trayWhen the Paper Error icon shows or the input tray is empty.
- How to load envelopes in the input trayWhen printing on envelopes.
- How to replace the cartridgesWhen a cartridge is missing, damaged, counterfeit, or the print quality is no longer acceptable.
- How to clean the cartridge contactsWhen a cartridge error continues after you remove the cartridge, check for plastic tape and reinsert it.
- How to align the cartridgesWhen print quality is poor and the estimated ink levels are not low.
- How to print a diagnostics pageWhen the cartridges are not low on ink and the print quality is poor.
- How to clean the cartridges from the printer softwareWhen the diagnostics page shows color blocks with white lines, faded blocks or missing blocks.
- How to set up the printer with the HP Smart appWhen setting up the printer on a wireless network for the first time or again.
- How to put the printer in Auto Wireless Connect setup modeWhen the light next to the Wireless button is not blinking blue during setup.
- How to connect to a wireless router with WPS push buttonWhen the router has a WPS push button.
- How to connect to a wireless router with the WPS PIN methodWhen you are not certain your router has a WPS push button.
- How to restore the network settings to defaultWhen the printer cannot connect to the wireless network after the other wireless checks.
- How to turn Wi-Fi Direct on or off from the control panelWhen the Wi-Fi Direct icon is off or you want to turn Wi-Fi Direct off.
- How to print from a mobile device with Wi-Fi DirectWhen printing from a phone or tablet without a router.
- How to print from a Windows computer with Wi-Fi DirectWhen printing from a computer without a router.
- How to print the Wireless Network Test ReportWhen the Wireless Attention icon blinks or the printer has trouble connecting to the wireless network.
- How to print a printer report from the control panelWhen you need the printer status, network details, the Wi-Fi Direct name, or the WPS PIN.
- How to open the embedded web serverWhen you need the printer's settings, firmware update or Web Services pages.
- How to open the embedded web server through Wi-Fi DirectWhen the printer is not on a network but Wi-Fi Direct is available.
- How to update the printer firmwareWhen you want to check for printer updates by hand.
- How to change the default paper size detected by the printerWhen an E1 or E2 code appears because the detected paper size does not match the loaded paper.
- How to turn Quiet Mode on or offWhen printing noise needs to be lower, or when you want normal print speed again.
- How to change the time to Sleep modeWhen you want the printer to sleep after a different period of inactivity.
- How to set up Web ServicesWhen you want to use Web Services. The printer must be connected to the Internet by a wireless connection.
- How to remove Web ServicesWhen you no longer want Web Services on the printer.
- How to connect the printer to a computer with a USB cableWhen you want a non-wireless connection.
Sources
- User Guide, HP DeskJet 2700e All-in-One series. HP Development Company, L.P. Document c07043348, revision ENWW (PDF created 2021-03-03), 124 pages, en. h10032.www1.hp.com (PDF). Retrieved 13 November 2026.
Page numbers are the numbers printed in the manual. Where this page and the manual differ, follow the manual.