Epson WF-2930 how to clear a document jam in the automatic document feeder

When originals jam in the ADF.

Steps

  1. Cancel the print job, if necessary.
  2. Remove your originals from the ADF.
  3. Open the ADF cover and carefully remove any jammed pages from beneath the ADF.
CAUTION

Make sure the ADF cover is opened before raising the ADF input tray or the ADF may be damaged.

Marked CAUTION by the manufacturer Source: Solving Problems: Document Jams in the Automatic Document Feeder, p. 268

  1. Raise the ADF input tray and remove the jammed paper, then lower the input tray.
  2. Close the ADF cover until you hear a click and reload your originals.
  3. Follow the prompts on the LCD screen to clear any error messages.

Source: Solving Problems: Document Jams in the Automatic Document Feeder Source: Solving Problems: Document Jams in the Automatic Document Feeder, pp. 266-270

Other WF-2930 procedures

Sources

  1. User's Guide, WF-2930. Epson America, Inc. Document CPD-62192, revision CPD-62192 (revision code not printed), 327 pages, en-US. files.support.epson.com (PDF). Listed on the manufacturer's support page. Retrieved 13 November 2026.

Page numbers are the numbers printed in the manual. Where this page and the manual differ, follow the manual.

Applies to
WF-2930. United States and Canada.
Source
User's Guide, WF-2930, CPD-62192 revision CPD-62192 (revision code not printed)
Last verified
Handbook
Epson WorkForce WF-2930 all-in-one printer in Printers; all Epson handbooks