Epson ET-2850 how to run a nozzle check from the control panel
When printouts are light or banded, to see whether the print head nozzles are clogged before cleaning.
Steps
- Make sure there are no errors on the LCD screen and the output tray is extended.
- Load a few sheets of plain paper in the product.
- Press the home button, if necessary.
- Select Maintenance > Nozzle Check.
- Press the start button to print the nozzle check pattern.
- Look for gaps in the printed lines.
- If there are no gaps, select No and press the OK button.
- If there are gaps or the pattern is faint, select Yes, press the OK button and follow the screen instructions to clean the print head.
- If most lines are missing or not printed, select No, press the OK button and run a Power Cleaning. See Run a Power Cleaning from the control panel.
If cleaning up to 3 times brings no improvement, turn the product off and wait at least 12 hours. Then run a nozzle check and clean the print head again. If quality still does not improve, run a Power Cleaning.
Source: Adjusting Print Quality: Checking the Nozzles Using the Product Control Panel Source: Adjusting Print Quality: Checking the Nozzles Using the Product Control Panel, pp. 162-163
Used for
Other ET-2850 procedures
- How to clean the print head from the control panelWhen the nozzle check pattern has gaps. Cleaning uses ink, so clean only when print quality declines.
- How to run a Power Cleaning from the control panelWhen white or dark lines or missing nozzles remain after cleaning the print head several times.
- How to align the print head from the control panelWhen printouts are grainy or blurry, vertical lines are misaligned, or dark or light horizontal bands appear.
- How to refill the ink tanksWhen the ink level is below the lower line on a tank. Fill the tank to the upper line.
- How to reset the ink levels when the LCD asks for itWhen the LCD screen prompts you to reset the ink levels. The message can appear even when ink remains in the tanks.
- How to clear a paper jam inside the productWhen the LCD screen reports paper jammed inside the product, including (W-01).
- How to clear a paper jam in the rear coverWhen the LCD screen reports paper jammed in the rear cover.
- How to run a product checkTo find out whether the product itself is working when printing from a computer fails.
- How to restore control panel settings to their defaultsWhen a control panel, network, copy or scan setting causes a problem.
Sources
- User's Guide, ET-2850. Epson America, Inc. Document CPD-60206, revision CPD-60206R1, 259 pages, en-US. files.support.epson.com (PDF). Listed on the manufacturer's support page. Retrieved 13 November 2026.
Page numbers are the numbers printed in the manual. Where this page and the manual differ, follow the manual.