Epson ET-2800 how to turn on Wi-Fi Direct
To connect a computer or mobile device directly to the printer without a router.
Steps
- Install the Epson Smart Panel app or another compatible Epson printing app on the mobile device.
- Press the home button, if necessary.
- Press the arrow buttons to select Wi-Fi Setup and press the OK button.
- Press the right arrow button to select Wi-Fi Direct and press the OK button.
- Press the OK button twice.
- To use Epson Smart Panel, open the app, press the down arrow button on the product to view the product information and select the product in the app. Then go to the last step. Otherwise press the left arrow button to select Other Methods.
- For iOS devices, select iOS, press the OK button, scan the QR code with the camera app and follow the instructions on the device. For other devices, select Other OS Devices, press the down arrow button, select the Wi-Fi network name (SSID) shown on the LCD screen on your device and enter the password shown.
- Press the OK button to exit.
Up to 8 devices can connect. If the no-connection Wi-Fi Direct icon stays on the LCD screen, Wi-Fi Direct is not enabled; repeat the steps.
Source: Enabling Wi-Fi Direct (Simple AP) Mode Source: Enabling Wi-Fi Direct (Simple AP) Mode, pp. 36-38
Used for
- Wi-Fi Direct not connected icon: Wi-Fi Direct mode is not enabled.
Other ET-2800 procedures
- How to clear a paper jam inside the printerWhen the LCD screen shows W-01 or a message that paper has jammed inside the product.
- How to run a nozzle check from the control panelWhen printouts are light or banded, to see whether the print head nozzles are clogged before cleaning.
- How to clean the print head from the control panelWhen the nozzle check pattern has gaps or is faint. Cleaning uses ink, so run it only when print quality declines.
- How to run a Power Cleaning from the control panelWhen most or all lines are missing in the nozzle check pattern, or the printout is blank. If most of the lines appear, run a Cleaning instead.
- How to align the print head from the control panelWhen printouts are grainy or blurry, vertical lines are misaligned, or dark or light horizontal bands appear. Banding can also come from clogged nozzles.
- How to clean the paper guide rollersWhen there is ink on the back of a printout.
- How to refill the ink tanksWhen an ink level is below the lower line on a tank, or the LCD screen reports low ink.
- How to run a product checkTo find out whether the printer itself works when printing from a computer fails.
- How to reset the network settingsWhen the network settings need to return to their defaults, for example before reinstalling the software.
- How to restore all control panel settings to their defaultsWhen a problem with control panel settings remains and you want to reset all of them.
- How to connect to Wi-Fi with the Wi-Fi Setup WizardTo join the printer to a wireless router from the control panel.
- How to connect to a router with WPSWhen the router or access point has a WPS button, hardware or virtual.
- How to print a network status sheetTo read the product's IP address, MAC address, signal strength or number of Wi-Fi Direct devices.
- How to print a network connection reportTo get an error code for a Wi-Fi connection problem.
- How to open the Web Config utilityTo view or change the printer's network settings in a web browser.
- How to turn off Wi-Fi or Wi-Fi DirectWhen you change the connection type or need to clear a network problem.
- How to connect the printer to a new Wi-Fi routerAfter you replace the wireless router.
- How to change from a USB connection to Wi-FiWhen the printer is connected to the computer by USB and you want it on Wi-Fi.
- How to change the LCD screen languageWhen the LCD screen text is in a language you cannot read.
- How to block computer access over USBTo restrict access to the product from a USB-connected computer.
- How to check the number of printsTo see the total, black-and-white and colour prints.
- How to clean the scanner glass and outer caseTo clean the product, which Epson says to do several times a year.
- How to prepare the printer for transport or storageBefore you move the printer any distance or store it.
- How to update the printer softwareTo get free updates to the product software.
Sources
- User's Guide, ET-2800/ET-2803. Epson America, Inc. Document CPD-60271, revision CPD-60271R2, 253 pages, en-US. files.support.epson.com (PDF). Listed on the manufacturer's support page. Retrieved 13 November 2026.
Page numbers are the numbers printed in the manual. Where this page and the manual differ, follow the manual.