Epson ET-2800 how to clean the paper guide rollers
When there is ink on the back of a printout.
Steps
CAUTION
Do not use tissues to clean the inside of the product. You can damage the product.
Marked CAUTION by the manufacturer Source: Cleaning the Paper Guide, pp. 177-178
- Load plain paper in Letter (8.5 x 11 inches [216 x 279 mm]) or A4 (8.3 x 11.7 inches [210 x 297 mm]) size if printouts are smeared or scuffed.
- Select Maintenance and press the OK button.
- Select Paper Guide Cleaning and press the OK button.
- Follow the on-screen instructions to clean the paper guide.
- Repeat until the paper comes out clean.
Source: Cleaning the Paper Guide Source: Cleaning the Paper Guide, pp. 177-178
Used for
Other ET-2800 procedures
- How to clear a paper jam inside the printerWhen the LCD screen shows W-01 or a message that paper has jammed inside the product.
- How to run a nozzle check from the control panelWhen printouts are light or banded, to see whether the print head nozzles are clogged before cleaning.
- How to clean the print head from the control panelWhen the nozzle check pattern has gaps or is faint. Cleaning uses ink, so run it only when print quality declines.
- How to run a Power Cleaning from the control panelWhen most or all lines are missing in the nozzle check pattern, or the printout is blank. If most of the lines appear, run a Cleaning instead.
- How to align the print head from the control panelWhen printouts are grainy or blurry, vertical lines are misaligned, or dark or light horizontal bands appear. Banding can also come from clogged nozzles.
- How to refill the ink tanksWhen an ink level is below the lower line on a tank, or the LCD screen reports low ink.
- How to run a product checkTo find out whether the printer itself works when printing from a computer fails.
- How to reset the network settingsWhen the network settings need to return to their defaults, for example before reinstalling the software.
- How to restore all control panel settings to their defaultsWhen a problem with control panel settings remains and you want to reset all of them.
- How to connect to Wi-Fi with the Wi-Fi Setup WizardTo join the printer to a wireless router from the control panel.
- How to turn on Wi-Fi DirectTo connect a computer or mobile device directly to the printer without a router.
- How to connect to a router with WPSWhen the router or access point has a WPS button, hardware or virtual.
- How to print a network status sheetTo read the product's IP address, MAC address, signal strength or number of Wi-Fi Direct devices.
- How to print a network connection reportTo get an error code for a Wi-Fi connection problem.
- How to open the Web Config utilityTo view or change the printer's network settings in a web browser.
- How to turn off Wi-Fi or Wi-Fi DirectWhen you change the connection type or need to clear a network problem.
- How to connect the printer to a new Wi-Fi routerAfter you replace the wireless router.
- How to change from a USB connection to Wi-FiWhen the printer is connected to the computer by USB and you want it on Wi-Fi.
- How to change the LCD screen languageWhen the LCD screen text is in a language you cannot read.
- How to block computer access over USBTo restrict access to the product from a USB-connected computer.
- How to check the number of printsTo see the total, black-and-white and colour prints.
- How to clean the scanner glass and outer caseTo clean the product, which Epson says to do several times a year.
- How to prepare the printer for transport or storageBefore you move the printer any distance or store it.
- How to update the printer softwareTo get free updates to the product software.
Sources
- User's Guide, ET-2800/ET-2803. Epson America, Inc. Document CPD-60271, revision CPD-60271R2, 253 pages, en-US. files.support.epson.com (PDF). Listed on the manufacturer's support page. Retrieved 13 November 2026.
Page numbers are the numbers printed in the manual. Where this page and the manual differ, follow the manual.