Canon TS3522 how to align the print head

After replacing a FINE cartridge, or when ruled lines print misaligned or print results are unsatisfactory.

Steps

  1. Check that the printer is turned on.
  2. Load a sheet of A4 or Letter-sized plain paper in the rear tray.
NOTICE

Do not touch any printed part on the print head alignment sheet. If the sheet is stained or wrinkled, it may not be scanned properly.

Signal word assigned by Model Handbook Source: If Printing Is Faint or Uneven: Aligning the Print Head, p. 78

  1. Press the Setup button until 4 appears on the LCD, then press the Black button or the Color button to print the print head alignment sheet.
  2. Place the alignment sheet on the platen with the printed side facing down, and align the mark in its upper left corner with the alignment mark on the platen.
  3. Close the document cover gently and press the Black button or the Color button. The alignment is complete when the ON lamp lights after flashing.
  4. Remove the alignment sheet from the platen.

If the alignment fails, the Alarm lamp lights; press the OK button to release the error.

Source: If Printing Is Faint or Uneven: Aligning the Print Head Source: If Printing Is Faint or Uneven: Aligning the Print Head, pp. 78-79

Other TS3522 procedures

Sources

  1. Online Manual, TS3500 series (PDF, macOS edition). Canon Inc. Document TS3500ser_OnlineManual_Mac_EN_V02, revision V02, 298 pages, en. gdlp01.c-wss.com (PDF). Listed on the manufacturer's support page. Retrieved 13 November 2026.

Page numbers are the numbers printed in the manual. Where this page and the manual differ, follow the manual.

Applies to
TS3522 (variants TS3520; TS3530; TS3550i; TS3551i). United States and Canada.
Source
Online Manual, TS3500 series (PDF, macOS edition), TS3500ser_OnlineManual_Mac_EN_V02 revision V02
Last verified
Handbook
Canon PIXMA TS3522 wireless all-in-one printer in Printers; all Canon handbooks