Brother HL-L2350DW how to connect to Wi-Fi when the SSID is not broadcast

When the access point or router does not broadcast its SSID.

Steps

  1. Write down the SSID, authentication method, encryption mode and Network Key.
  2. Press ▲ or ▼ to select Network and press OK.
  3. Press ▲ or ▼ to select WLAN and press OK.
  4. Press ▲ or ▼ to select Setup Wizard and press OK.
  5. When WLAN Enable? appears, press ▼ to select On.
  6. In the SSID list, press ▲ or ▼ to select <New SSID> and press OK.
  7. Enter the SSID name and press OK.
  8. Select Infrastructure and press OK.
  9. Press ▲ or ▼ to select the Authentication Method and press OK.
  10. Select the encryption type and enter the WEP or WPA key when asked.
  11. Press ▼ to apply the settings and wait for Connected to appear on the LCD.

Source: Network: Configure Your Machine for a Wireless Network When the SSID Is Not Broadcast Source: Network: Configure Your Machine for a Wireless Network When the SSID Is Not Broadcast, pp. 64-65

Other HL-L2350DW procedures

Sources

  1. Online User's Guide, HL-L2310D / HL-L2350DW / HL-L2357DW / HL-L2370DN / HL-L2375DW (UK English). Brother Industries, Ltd. Document cv_hll2310d_uke_oug_c, revision c (PDF created 2021-01-31), 249 pages, en-GB. download.brother.com (PDF). Listed on the manufacturer's support page. Retrieved 13 November 2026.

Page numbers are the numbers printed in the manual. Where this page and the manual differ, follow the manual.

Applies to
HL-L2350DW. United Kingdom.
Source
Online User's Guide, HL-L2310D / HL-L2350DW / HL-L2357DW / HL-L2370DN / HL-L2375DW (UK English), cv_hll2310d_uke_oug_c revision c (PDF created 2021-01-31)
Last verified
Handbook
Brother HL-L2350DW laser printer in Printers; all Brother handbooks