Brother HL-L2350DW how to clear a paper jam at the back of the machine

When the LCD shows Jam Rear.

Steps

  1. Leave the machine on for 10 minutes so the internal fan cools the very hot parts inside.
  2. Open the back cover.
  3. If the green envelope levers inside the back cover are pulled down to the envelope position, lift them back to the original position.
  4. Pull the blue tabs on the left and right toward you to release the fuser cover.
WARNING

HOT SURFACE: The machine's internal parts will be extremely hot. Wait for the machine to cool down before touching them.

Marked WARNING by the manufacturer Source: Troubleshooting: Paper Jams: Paper is Jammed in the Back of the Machine, p. 162

  1. Pull the jammed paper gently out of the fuser unit with both hands.
  2. Close the fuser cover. If you print on envelopes, pull the green envelope levers down to the envelope position again before closing the back cover.
  3. Close the back cover until it locks.

Source: Troubleshooting: Paper Jams: Paper is Jammed in the Back of the Machine Source: Troubleshooting: Paper Jams: Paper is Jammed in the Back of the Machine, pp. 162-163

Used for

Other HL-L2350DW procedures

Sources

  1. Online User's Guide, HL-L2310D / HL-L2350DW / HL-L2357DW / HL-L2370DN / HL-L2375DW (UK English). Brother Industries, Ltd. Document cv_hll2310d_uke_oug_c, revision c (PDF created 2021-01-31), 249 pages, en-GB. download.brother.com (PDF). Listed on the manufacturer's support page. Retrieved 13 November 2026.

Page numbers are the numbers printed in the manual. Where this page and the manual differ, follow the manual.

Applies to
HL-L2350DW. United Kingdom.
Source
Online User's Guide, HL-L2310D / HL-L2350DW / HL-L2357DW / HL-L2370DN / HL-L2375DW (UK English), cv_hll2310d_uke_oug_c revision c (PDF created 2021-01-31)
Last verified
Handbook
Brother HL-L2350DW laser printer in Printers; all Brother handbooks