Miele error codes and indicator lights

Each table applies only to the model named above it.

Miele G 7200 dishwasher

Code	Meaning on G 7200
Fault FXX	There may be a technical fault.
Fault F78	Circulation pump fault.
Fault F18	A technical fault.
Waterproof	The water protection system (Waterproof system) has reacted.
Door fault	The door does not open automatically, or the door lock catches do not retract after the door is opened.
Open stopcock	The stopcock is closed.
Water intake	There is a water inlet fault.
Drain	A water drainage fault. There might be water in the wash cabinet.
Check filters	The filter combination is due for checking after every 50 programme cycles.

Code	Meaning on WQ 1000 WPS
Fault F34	The door is not closed properly and the door lock could not engage.
Fault F35	The door lock has jammed.
Fault F10	The washing machine could not draw in enough water.
Fault F11	Water drainage fault.
Fault F138	The Waterproof system has been activated.
Fault F373	The washing machine has detected a leak in the drain filter.
Fault F210	The drain pumps and the nozzle in the door sealing ring are dirty; the washing machine has switched to an emergency programme.
Fault F585	The drain pumps and the nozzle in the door sealing ring are dirty; the washing machine has switched to an emergency programme.
Fault FXXX	The washing machine has detected a fault.
Select a programme at 60 °C or higher or run the 'Clean machine' programme	A programme above 60 °C has not been run for a long time, which can build up germs and odours.
Check dosage	Excessive foam has built up during washing.
TwinDos empty sensor defective	The fill level of the TwinDos cartridges cannot be detected.
Use TwinDos	TwinDos has not been used for a long time, which risks blocked hoses.
Clean TwinDos	TwinDos must be cleaned because it has not been used for too long.