Miele G 7200 error Drain
A water drainage fault. There might be water in the wash cabinet.
CauseThere is a water drainage fault and there might be water in the wash cabinet. Source: Problem solving guide: Water drainage fault, p. 82
First checkSwitch the dishwasher off.
Causes and checks
There is a water drainage fault and there might be water in the wash cabinet. Source: Problem solving guide: Water drainage fault, p. 82
- Switch the dishwasher off.
- Clean the filter combination. See Clean the filter combination.
- Clean the drain pump. See Clean the drain pump.
- Remove any kinks or loops in the drain hose.
Service
If the checks above do not clear it, contact Miele Customer Service Department: 0330 160 6600, miele.co.uk. United Kingdom. Source: Back cover: United Kingdom, p. 99
Other G 7200 codes
- Fault FXX: There may be a technical fault.
- Fault F78: Circulation pump fault.
- Fault F18: A technical fault.
- Waterproof: The water protection system (Waterproof system) has reacted.
- Door fault: The door does not open automatically, or the door lock catches do not retract after the door is opened.
- Open stopcock: The stopcock is closed.
- Water intake: There is a water inlet fault.
- Check filters: The filter combination is due for checking after every 50 programme cycles.
Sources
- Operating instructions, Dishwashers G 7200, G 7202, G 7205, G 7207. Miele & Cie. KG. Document M.-Nr. 11 952 311, revision / 01, HG07, en-GB, 100 pages, en-GB. media.miele.com (PDF). Retrieved 13 November 2026.
Page numbers are the numbers printed in the manual. Where this page and the manual differ, follow the manual.