eufy error codes and indicator lights
Each table applies only to the model named above it.
eufy Clean L60 Hybrid SES robot vacuum
| Code | Meaning on L60 Hybrid SES (T2278) |
|---|---|
| Solid white | RoboVac is working normally. |
| Pulsing white | RoboVac is charging with a battery level above 12%. After 1 minute fully charged, RoboVac switches to Sleep Mode. |
| Flashing white | RoboVac is returning to the Self Empty Station. |
| Flashing red slowly | RoboVac has an error, or it is in Standby mode with the battery level below 12%. |
| Flashing white quickly | The Wi-Fi connection is being reset. |
| Solid red | RoboVac's Wi-Fi connection has dropped. |
| Lights off | RoboVac switches to Sleep Mode after being idle for 10 minutes. |
| Suction fan error | eufy lists a suction fan error for the L50 and L60 series and gives owner checks. |
eufy RoboVac 11S robot vacuum
| Indicator | Meaning on T2108 |
|---|---|
| Breathing orange | RoboVac is charging. |
| Solid blue | RoboVac is on standby, cleaning or fully charged. |
| Solid orange | Power is low and RoboVac is returning to the Charging Base. |
| Light off | RoboVac is off, or the light switched itself off after 1 minute of inactivity while RoboVac is not docked. |
| Flashing red | RoboVac has an error. The number of beeps identifies it: two beeps, three beeps or four beeps. |
| Solid red | RoboVac has an error. The number of beeps identifies it: one, two, three or four beeps. |
eufy RoboVac G30 robot vacuum
| Code | Meaning on G30 (T2250) |
|---|---|
| Solid blue (Start/Pause) | RoboVac is on standby, cleaning, paused, returning to the Charging Base or fully charged. |
| Solid orange (Start/Pause) | RoboVac is on standby or working with a low battery. |
| Flashing red (Start/Pause) | RoboVac has an error and speaks a voice prompt such as Error 5 or Error S1. |
| Wi-Fi light slowly flashing blue | RoboVac is waiting for a connection. |
| Wi-Fi light rapidly flashing blue | RoboVac is connecting with your wireless router. |
| Wi-Fi light solid blue | RoboVac is connected to your wireless router. |
| Return to Charging Base button blue | Flashing slowly: RoboVac is returning to the Charging Base. Steady: standby or paused. |
| Spot Cleaning button blue | Flashing slowly: Spot mode. Steady: standby or paused. |
| Three solid blue LEDs | The Find My Robot function in the eufy Clean app is active. |
| Error 1 | The front bumper is stuck. |
| Error 2 | A wheel is stuck or trapped. |
| Error 4 | The rolling brush is stuck. |
| Error 5 | RoboVac is trapped. |
| Error 6 | RoboVac may be suspended in the air. |
| Error 7 | The wheels may be suspended in the air. |
| Error 8 | The battery is low and the system shuts down. |
| Error 9 | RoboVac is too close to a strong magnetic field or a magnetic boundary strip. This prompt applies to G30 Edge, G30 Verge and G30 Hybrid. |
| Error 10 | The path tracking sensor is blocked by dust. |
| Error 21 | Obstacles block the Charging Base. |
| Error S1 | Battery error. |
| Error S2 | Wheel module error. |
| Error S3 | Side brush error. |
| Error S4 | Suction fan error. |
| Error S5 | Rolling brush error. |
| Error S8 | Path tracking sensor error. |