Samsung WF45T6000AW how to drain the washer by hand after a power failure

After a power failure, before you take the laundry out.

Steps

  1. Turn off the washer, and then unplug the power cord.
  2. Gently press the top area of the filter cover to open it.
  3. Put an empty, spacious container around the cover, and stretch the emergency drain tube to the container while holding the tube cap (A).
  4. Open the tube cap and let the water in the emergency drain tube (B) flow into the container.
  5. When done, close the tube cap and reinsert the tube. Then close the filter cover.

The water in the drum may be more than expected, so use a spacious container.

Source: Maintenance: Emergency drain Source: Maintenance: Emergency drain, p. 43

Used for

Other WF45T6000AW procedures

Sources

  1. User manual, Washer WF45T6000A*. Samsung Electronics America, Inc. Document DC68-04006R-07, revision 07, 204 pages, en. downloadcenter.samsung.com (PDF). Listed on the manufacturer's support page. Retrieved 13 November 2026.

Page numbers are the numbers printed in the manual. Where this page and the manual differ, follow the manual.

Applies to
WF45T6000AW (variant WF45T6000AW/A5). United States and Canada.
Source
User manual, Washer WF45T6000A*, DC68-04006R-07 revision 07
Last verified
Handbook
Samsung WF45T6000AW front-load washer in Washers; all Samsung handbooks