Samsung WF45T6000AW how to clean the mesh filters of the water hoses

Once or twice a year, and more often if the water comes from an aged water system or a well. The 4C code appears when a mesh filter is clogged.

Steps

  1. Turn off the washer, and then unplug the power cord.
  2. Close the water tap.
  3. Loosen and disconnect the water hoses from the back of the washer. Cover the end of each hose with a cloth or towel to prevent water from gushing out.
  4. Use pliers to pull out the mesh filter from the inlet valves.
  5. Thoroughly clean the mesh filters in water.
  6. Completely dry the mesh filters. Do not dry them in direct sunlight.
  7. Reinsert the mesh filters, and then reconnect the water hoses.
  8. Open the water taps.

Source: Maintenance: Cleaning, Mesh filter Source: Maintenance: Cleaning, Mesh filter, p. 44

Used for

Other WF45T6000AW procedures

Sources

  1. User manual, Washer WF45T6000A*. Samsung Electronics America, Inc. Document DC68-04006R-07, revision 07, 204 pages, en. downloadcenter.samsung.com (PDF). Listed on the manufacturer's support page. Retrieved 13 November 2026.

Page numbers are the numbers printed in the manual. Where this page and the manual differ, follow the manual.

Applies to
WF45T6000AW (variant WF45T6000AW/A5). United States and Canada.
Source
User manual, Washer WF45T6000A*, DC68-04006R-07 revision 07
Last verified
Handbook
Samsung WF45T6000AW front-load washer in Washers; all Samsung handbooks