Samsung WF45T6000AW how to run the SELF CLEAN+ cycle

At least once a month or every 40 cycles. The SELF CLEAN+ reminder icon blinks for an hour after 40 washing cycles.

Steps

  1. Remove all items from the drum and make sure it is empty. Laundry left in the drum during the cycle may be damaged.
  2. Press Power to turn on the washer.
  3. Turn the Cycle Selector to SELF CLEAN+.
CAUTION

If there is chlorine bleach left in the washer drum for an extended period of time, rust can occur.

Marked CAUTION by the manufacturer Source: Maintenance: Self Clean, p. 41

  1. If residue is present in the drum, add liquid chlorine bleach to the MAX level line in the main-wash compartment. Do not add it to the bleach compartment, do not go above the line, and do not use or mix any other detergent or chemicals.
  2. Press and hold Start/Pause (Hold to Start).

The water temperature for SELF CLEAN+ is Hot and cannot be changed. If residue remains afterwards, run a RINSE+SPIN cycle.

Source: Maintenance: Self Clean Source: Maintenance: Self Clean, p. 41

Used for

Other WF45T6000AW procedures

Sources

  1. User manual, Washer WF45T6000A*. Samsung Electronics America, Inc. Document DC68-04006R-07, revision 07, 204 pages, en. downloadcenter.samsung.com (PDF). Listed on the manufacturer's support page. Retrieved 13 November 2026.

Page numbers are the numbers printed in the manual. Where this page and the manual differ, follow the manual.

Applies to
WF45T6000AW (variant WF45T6000AW/A5). United States and Canada.
Source
User manual, Washer WF45T6000A*, DC68-04006R-07 revision 07
Last verified
Handbook
Samsung WF45T6000AW front-load washer in Washers; all Samsung handbooks