Roborock Q7 Max (Q380RR) how to clean the main brush
Every 2 weeks.
Steps
- Turn the robot over and press the latches to remove the main brush cover.
- Pull out the main brush and remove the main brush bearing.
- Rotate the main brush caps in the unlock direction to remove them.
- Remove any hair or dirt entangled around the main brush.
- Reinstall the main brush and re-insert the main brush cover, placing the tabs in the slots.
- Check that the cover is attached: when it is properly installed, all four tabs are hidden.
Wipe the main brush with a wet cloth and leave it to dry away from direct sunlight. Do not use corrosive cleaning fluids or disinfectants on it.
Source: Routine Maintenance: Main Brush Source: Routine Maintenance: Main Brush, p. 10
Other Q7 Max (Q380RR) procedures
- How to reset the WiFi connectionWhen the robot cannot connect to the app or must be added as a new device.
- How to disconnect the robot from WiFiWhen the robot should no longer be connected to WiFi.
- How to reset the robot systemWhen the robot does not respond to a button press or cannot be turned off.
- How to restore the robot to factory settingsWhen the robot does not work properly after a system reset.
- How to clean the side brushMonthly.
- How to clean the omni-directional wheelAs required.
- How to empty and clean the dustbin and water tank combo unitWeekly.
- How to clean the washable filterWhen the combo unit is cleaned.
- How to clean the mop clothAfter each use.
- How to clean the robot sensorsMonthly.
- How to clean the charging contactsMonthly.
Sources
- Roborock Q7 Max Robotic Vacuum Cleaner User Manual (EN/FR/DE/IT/ES/NL/PL/NO/SV). Beijing Roborock Technology Co., Ltd. Document Q380RR, revision Undated download (PDF created 2025-03-06), 13 pages, en. gl-files.roborock.com (PDF). Retrieved 13 November 2026.
Page numbers are the numbers printed in the manual. Where this page and the manual differ, follow the manual.