LG LRGL5823S how to clean the burner heads and caps

When a burner does not light or burn evenly, and after spillovers.

Steps

CAUTION

Do not hit the electrodes with anything hard. Doing so could damage them.

Marked CAUTION by the manufacturer Source: Maintenance: Gas Surface Burners, p. 44

  1. Let the cooktop cool, then lift off the grates, burner caps and heads. Do not remove the oval burner middle cap.
  2. Wash the burner caps in hot soapy water and rinse them. Run water through the oval burner from the bottom stem to flush out debris.
  3. To remove burnt-on food, soak the burner heads in mild liquid detergent and hot water for 20 to 30 minutes. Use a toothbrush or wire brush on stubborn stains.
  4. Shake out excess water and let the parts dry thoroughly.
  5. Put the burner heads and caps back over the electrodes in the correct locations by size, with the hole in each head over its electrode.

Do not use steel wool or scouring powders on the burners. Burners will not light if a cap is removed.

Source: Maintenance: Gas Surface Burners Source: Maintenance: Gas Surface Burners, p. 44

Used for

Other LRGL5823S procedures

Sources

  1. Owner's Manual, Gas Range LRGL5825*, LRGL5823* and LRGL5821*. LG Electronics Inc. Document MFL33029630, revision Rev.18, 2025-01-24, 125 pages, en-US. gscs-b2c.lge.com. Listed on the manufacturer's support page. Retrieved 13 November 2026.

Page numbers are the numbers printed in the manual. Where this page and the manual differ, follow the manual.

Applies to
LRGL5823S, LRGL5825F. United States.
Source
Owner's Manual, Gas Range LRGL5825*, LRGL5823* and LRGL5821*, MFL33029630 revision Rev.18, 2025-01-24
Last verified
Handbook
LG LRGL5823S gas range in Ranges and ovens; all LG handbooks