LG LRGL5823S how to light a surface burner

To light a sealed gas burner with the electric spark igniter.

Steps

CAUTION

WHAT TO DO IF YOU SMELL GAS: Open windows. Do not try to light any appliance. Do not touch any electrical switch. Do not use any phone in your building. Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions. If you cannot reach your gas supplier, call the fire department.

Marked CAUTION by the manufacturer Source: Operation: Gas Surface Burners, p. 21

  1. Check that all surface burners and grates are in the correct positions.
  2. Place cookware on the grate.
  3. Push the control knob in and turn it to the LITE position. All burners spark while a knob is at LITE.
  4. After the burner lights, turn the knob counterclockwise to the HI position to stop the clicking.
  5. Turn the knob to set the flame size.

Source: Operation: Using the Gas Surface Burners Source: Operation: Using the Gas Surface Burners, p. 22

Other LRGL5823S procedures

Sources

  1. Owner's Manual, Gas Range LRGL5825*, LRGL5823* and LRGL5821*. LG Electronics Inc. Document MFL33029630, revision Rev.18, 2025-01-24, 125 pages, en-US. gscs-b2c.lge.com. Listed on the manufacturer's support page. Retrieved 13 November 2026.

Page numbers are the numbers printed in the manual. Where this page and the manual differ, follow the manual.

Applies to
LRGL5823S, LRGL5825F. United States.
Source
Owner's Manual, Gas Range LRGL5825*, LRGL5823* and LRGL5821*, MFL33029630 revision Rev.18, 2025-01-24
Last verified
Handbook
LG LRGL5823S gas range in Ranges and ovens; all LG handbooks