LG DLHC1455W how to turn off Control Lock
When the buttons beep and nothing happens, or CL shows in the display.
Steps
- Press the Power button to turn the dryer on.
- Press and hold the Wrinkle Care and Condenser Care buttons at the same time for 3 seconds.
Source: Operation: Control Lock Source: Operation: Control Lock, pp. 32-33
Used for
- CL: Not a fault. Control Lock is on, so every button except Power is locked. The door is not locked.
Other DLHC1455W procedures
- How to clean the inner and outer lint filtersBefore and after each use for the inner filter; after 10 drying cycles, when lint builds up on the outer filter, or when the filter icon blinks with a chime.
- How to empty the water containerAfter every use, and when the Water Full icon lights. Not needed when the optional drain hose is installed.
- How to drain the remaining condensed waterRegularly, to reduce odors, before a long absence and before running Drum Care. Also drains water that could freeze in cold weather.
- How to run the Drum Care cyclePeriodically, to prevent unpleasant odors in the drum.
- How to clean the condenser with Condenser CareThe dryer cleans lint off the condenser automatically with condensed water. Run this manual cleaning if needed.
- How to thaw a frozen dryerWhen OE or the Water Full icon appears because the condensed water inside the dryer is frozen.
- How to thaw a frozen dryer with hot waterWhen OE or the Water Full icon appears because the condensed water inside the dryer is frozen, and the thawing mode is not used.
- How to save and recall a custom programTo reuse a combination of settings.
Sources
- Owner's Manual, Dryer DLHC1455*. LG Electronics Inc. Document MFL71424358, revision Rev.08, 2024-03-06, 56 pages, en-US. gscs-b2c.lge.com. Listed on the manufacturer's support page. Retrieved 13 November 2026.
Page numbers are the numbers printed in the manual. Where this page and the manual differ, follow the manual.