LG DLHC1455W how to run the Drum Care cycle

Periodically, to prevent unpleasant odors in the drum.

Steps

CAUTION

Remove all of the clothes from the appliance.

Marked CAUTION by the manufacturer Source: Maintenance: Using Drum Care Feature, p. 41

  1. Remove all of the clothes from the dryer.
  2. Remove the water container, empty it and put it back.
  3. Turn on the dryer.
  4. Press the Drum Care button for 3 seconds.
  5. Press the Start/Pause button. The function runs for about 3 hours.
  6. Empty the water container after the function has finished.
WARNING

For safety reasons, do not allow children or animals to climb into the appliance. Doing so could cause damage or injury.

Marked WARNING by the manufacturer Source: Maintenance: Using Drum Care Feature, p. 42

  1. Open the dryer door and leave it open so air circulates in the drum.

Drain the remaining water first for the best results. If the optional drain hose is installed, the water container does not need to be emptied.

Source: Maintenance: Using Drum Care Feature Source: Maintenance: Using Drum Care Feature, pp. 41-42

Used for

Other DLHC1455W procedures

Sources

  1. Owner's Manual, Dryer DLHC1455*. LG Electronics Inc. Document MFL71424358, revision Rev.08, 2024-03-06, 56 pages, en-US. gscs-b2c.lge.com. Listed on the manufacturer's support page. Retrieved 13 November 2026.

Page numbers are the numbers printed in the manual. Where this page and the manual differ, follow the manual.

Applies to
DLHC1455W. United States.
Source
Owner's Manual, Dryer DLHC1455*, MFL71424358 revision Rev.08, 2024-03-06
Last verified
Handbook
LG DLHC1455W heat pump dryer in Dryers; all LG handbooks