LG DLHC1455W how to thaw a frozen dryer

When OE or the Water Full icon appears because the condensed water inside the dryer is frozen.

Steps

CAUTION

Wear gloves and take care to avoid burning yourself with hot water.

Marked CAUTION by the manufacturer Source: Maintenance: Thawing out the Accessories, p. 42

  1. Thaw the accessories first: wrap a frozen drain hose in a towel soaked in hot water at 140 °F (60 °C), or put a frozen water container in a sink of hot water at 140 °F (60 °C).
  2. Turn on the dryer and press the Less Time button for 3 seconds to start the thawing mode. Press only that button on the control panel.
  3. Press the Start/Pause button to start the thawing mode. The thawing time cannot be changed.
  4. When thawing is complete, dry clothes as usual.

Only the Power and Start/Pause buttons work in the thawing mode. Turn the dryer off to leave it.

Source: Maintenance: Care in Cold Climates Source: Maintenance: Care in Cold Climates, pp. 42-43

Used for

Other DLHC1455W procedures

Sources

  1. Owner's Manual, Dryer DLHC1455*. LG Electronics Inc. Document MFL71424358, revision Rev.08, 2024-03-06, 56 pages, en-US. gscs-b2c.lge.com. Listed on the manufacturer's support page. Retrieved 13 November 2026.

Page numbers are the numbers printed in the manual. Where this page and the manual differ, follow the manual.

Applies to
DLHC1455W. United States.
Source
Owner's Manual, Dryer DLHC1455*, MFL71424358 revision Rev.08, 2024-03-06
Last verified
Handbook
LG DLHC1455W heat pump dryer in Dryers; all LG handbooks