LG DLHC1455W how to save and recall a custom program
To reuse a combination of settings.
Steps
- Turn the dryer on and set the cycle, cycle modifiers and options.
- Press and hold the Custom PGM button for 3 seconds. A saved program is replaced, because only one can be stored.
- To use it later, turn the dryer on, press Custom PGM and press Start/Pause.
Source: Operation: Custom PGM Source: Operation: Custom PGM, p. 32
Other DLHC1455W procedures
- How to clean the inner and outer lint filtersBefore and after each use for the inner filter; after 10 drying cycles, when lint builds up on the outer filter, or when the filter icon blinks with a chime.
- How to empty the water containerAfter every use, and when the Water Full icon lights. Not needed when the optional drain hose is installed.
- How to drain the remaining condensed waterRegularly, to reduce odors, before a long absence and before running Drum Care. Also drains water that could freeze in cold weather.
- How to run the Drum Care cyclePeriodically, to prevent unpleasant odors in the drum.
- How to clean the condenser with Condenser CareThe dryer cleans lint off the condenser automatically with condensed water. Run this manual cleaning if needed.
- How to thaw a frozen dryerWhen OE or the Water Full icon appears because the condensed water inside the dryer is frozen.
- How to thaw a frozen dryer with hot waterWhen OE or the Water Full icon appears because the condensed water inside the dryer is frozen, and the thawing mode is not used.
- How to turn off Control LockWhen the buttons beep and nothing happens, or CL shows in the display.
Sources
- Owner's Manual, Dryer DLHC1455*. LG Electronics Inc. Document MFL71424358, revision Rev.08, 2024-03-06, 56 pages, en-US. gscs-b2c.lge.com. Listed on the manufacturer's support page. Retrieved 13 November 2026.
Page numbers are the numbers printed in the manual. Where this page and the manual differ, follow the manual.