De'Longhi ECAM370.95.T coffee is weak or has little crema
Cause 1 of 2Grind too coarse. Source: 19. Troubleshooting, p. 24
First checkWhile the grinder is running, turn the grinding adjustment dial one click anticlockwise towards 1. Judge after 2 coffees and repeat one click at a time.
Causes and checks
Grind too coarse. Source: 19. Troubleshooting, p. 24
- While the grinder is running, turn the grinding adjustment dial one click anticlockwise towards 1. Judge after 2 coffees and repeat one click at a time.
Unsuitable or stale coffee. Source: 19. Troubleshooting, p. 24
- Use fresh coffee intended for espresso machines.
All 2 causes checked. Contact De'Longhi Customer Services.
Service
If the checks above do not clear it, contact De'Longhi Customer Services, delonghi.com/en/s/ECAM370.95.T. Numbers per country are on the Customer Service sheet supplied with the machine. Source: 1.2 Troubleshooting and repairs, p. 7
Other ECAM370.95.T problems
- Coffee is not hot3 causes in the manual. First: cups not preheated.
- Coffee comes out slowly or drop by dropGrind too fine.
- Coffee does not come out of one or both spoutsSpouts blocked.
- Machine will not make coffee and shows Cleaning underwayImpurities detected in the internal circuits.
- Machine does not switch onPower cord not fully in the socket on the back, not plugged in, or the main switch off.
- Infuser cannot be removedThe machine was not switched off with its on/off button.
- Asks for a third rinse after descalingThe tank was not filled to MAX for the two rinse cycles.
- No milk comes from the milk spoutMilk container lid dirty.
- Milk has large bubbles, spurts, or has little froth3 causes in the manual. First: milk not cold enough, or not skimmed or semi-skimmed.
Sources
- Instructions for use, Dinamica Plus ECAM370.95.T (English). De'Longhi Appliances S.r.l. Document 5713238071, revision EN-5713238071 (PDF dated 2018-07-06), 2018-07-06, 25 pages, en. library.delonghigroup.com. Listed on the manufacturer's support page. Retrieved 13 November 2026.
Page numbers are the numbers printed in the manual. Where this page and the manual differ, follow the manual.