Epson WF-2930 paper does not feed or several sheets feed at once
Cause 1 of 4Paper does not feed for printing. Source: Solving Problems: Paper Feeding Problems, p. 261
First checkRemove the paper, then reload it in the middle of the rear paper feeder.
Causes and checks
Paper does not feed for printing. Source: Solving Problems: Paper Feeding Problems, p. 261
- Remove the paper, then reload it in the middle of the rear paper feeder.
- Slide the edge guides against the paper and keep the stack below the arrow mark on the edge guides.
Several pages feed at once. Source: Solving Problems: Paper Feeding Problems, p. 261
- Remove the paper, fan the edges to separate the sheets, and reload it, or try loading one sheet at a time.
- If the paper may be moist, load new paper. During manual 2-sided printing, remove any paper from the product before reloading.
Paper jams when you print on both sides. Source: Solving Problems: Paper Feeding Problems, p. 261
- Load fewer sheets.
An original sits on the scanner glass. It takes precedence over originals in the ADF. Source: Solving Problems: Paper Feeding Problems, p. 262
- Remove the original from the scanner glass.
All 4 causes checked. Contact Epson Support: (562) 276-4382.
Service
If the checks above do not clear it, contact Epson Support: (562) 276-4382, epson.com/support. United States; Canada (905) 709-3839. 7 AM to 4 PM Pacific Time Monday to Friday. Source: Solving Problems: Where to Get Help, p. 302
Other WF-2930 problems
- Originals do not feed from the automatic document feeder2 causes in the manual. First: the ADF icon is not lit on the Copy, Fax or Scan screen.
Sources
- User's Guide, WF-2930. Epson America, Inc. Document CPD-62192, revision CPD-62192 (revision code not printed), 327 pages, en-US. files.support.epson.com (PDF). Listed on the manufacturer's support page. Retrieved 13 November 2026.
Page numbers are the numbers printed in the manual. Where this page and the manual differ, follow the manual.