Samsung WA50R5200AW how to run the SELF CLEAN cycle
At least once a month or every 20 cycles. The SELF CLEAN reminder icon blinks for an hour after 20 washing cycles.
Steps
Check the washer tub before using the SELF CLEAN cycle. Remove any remaining water in the tub by running a SPIN ONLY cycle prior to starting the SELF CLEAN cycle.
Marked CAUTION by the manufacturer Source: Maintenance: Self Clean, p. 46
- Remove all items from the washer tub and make sure it is empty. Laundry left in the tub during the cycle may be damaged.
- Press Power to turn on the washer.
- Turn the Cycle Selector to SELF CLEAN.
If there is chlorine bleach left in the washer tub for an extended period of time, rust can occur.
Marked CAUTION by the manufacturer Source: Maintenance: Self Clean, p. 46
- If residue is present in the tub, add 1 cup (8 fl. oz, 240 ml) of liquid chlorine bleach to the bleach compartment. Do not use or mix any other detergent or chemicals during the cycle.
- Press and hold Start/Pause (Hold to Start).
The water temperature for SELF CLEAN is Hot and cannot be changed. If necessary, run a RINSE+SPIN cycle afterwards to help remove any remaining residue.
Source: Maintenance: Self Clean Source: Maintenance: Self Clean, p. 46
Used for
Other WA50R5200AW procedures
- How to clean the mesh filters in the water inletsOnce or twice a year. The 4C code appears when a mesh filter is clogged.
- How to clean the detergent drawerWhen detergent remains in the dispenser after a cycle.
- How to run calibrationRecommended initial setting. Calibration lets the washer detect load weight accurately.
- How to prepare the washer for a long period without useWhen you will leave the washer unused for a long time. The manual advises against leaving it unused for an extended time.
Sources
- User manual, Washer WA54R7200A* / WA50R5200A*. Samsung Electronics America, Inc. Document DC68-04037J-05, revision 05, 72 pages, en. downloadcenter.samsung.com (PDF). Listed on the manufacturer's support page. Retrieved 13 November 2026.
Page numbers are the numbers printed in the manual. Where this page and the manual differ, follow the manual.