Samsung WA49B5205AW water is not supplied
Cause 1 of 8Start/Pause (Hold to Start) was not pressed after selecting the cycle and options. Source: Troubleshooting: Checkpoints, p. 53
First checkPress or tap Start/Pause (Hold to Start) after selecting the cycle and options.
Causes and checks
Start/Pause (Hold to Start) was not pressed after selecting the cycle and options. Source: Troubleshooting: Checkpoints, p. 53
- Press or tap Start/Pause (Hold to Start) after selecting the cycle and options.
The water taps are closed. Source: Troubleshooting: Checkpoints, p. 53
- Make sure the water taps are open.
The mesh filters in the water inlets are clogged. Source: Troubleshooting: Checkpoints, p. 53
- Clean the mesh filters by brushing with a toothbrush. See Clean the mesh filters in the water inlets.
The water supply is cut off. Source: Troubleshooting: Checkpoints, p. 53
- If the water supply is cut off, close the tap and power off.
The water supply hoses are bent. Source: Troubleshooting: Checkpoints, p. 53
- Straighten the water supply hoses.
The washer has not started filling. Source: Troubleshooting: Checkpoints, p. 53
- Open and close the door, and then press or tap Start/Pause (Hold to Start).
Water pressure is low. Source: Troubleshooting: Checkpoints, p. 53
- Wait. If the water pressure is low, it takes longer to start washing.
The water level is lower than expected. Source: Troubleshooting: Checkpoints, p. 53
- Use the level selector to adjust the water level if it is not as high as necessary or lower than expected.
All 8 causes checked. Contact Samsung Customer Service: 1-800-SAMSUNG (726-7864).
Service
If the checks above do not clear it, contact Samsung Customer Service: 1-800-SAMSUNG (726-7864), samsung.com/us/support/. United States. Source: Troubleshooting: Information codes, p. 60
Other WA49B5205AW problems
- The washer does not turn on3 causes in the manual. First: the home electrical supply does not match the washer's requirements.
- The washer does not start8 causes in the manual. First: the door is not closed.
- Detergent remains in the automatic dispenser after a cycle2 causes in the manual. First: water pressure is too low.
- The washer vibrates excessively or makes noise6 causes in the manual. First: the floor is not level.
- The washer stops during a cycle5 causes in the manual. First: the washer has no power.
- The washer fills with the wrong temperature of water4 causes in the manual. First: A tap is not fully open, or the temperature selection is wrong.
- The door (lid) is locked or will not openThe cycle is still running, or the lock has not released.
- The washer does not drain or spin4 causes in the manual. First: the household power supply has a fault.
- The load is wet at the end of the cycle3 causes in the manual. First: the spin speed is too low.
- The washer leaks water5 causes in the manual. First: A hose connection is loose or a hose washer is misplaced.
- Excessive sudsThe detergent type or amount is wrong.
- The spin basket or a drain or supply hose is frozenThe water in the basket or hoses has frozen.
- Water drains out immediately3 causes in the manual. First: the drain hose is clogged or not hung over the drain hose hook.
- Stains remain on clothes2 causes in the manual. First: the cycle or detergent amount does not suit the load.
- The washer smells2 causes in the manual. First: excessive suds collect in recesses.
- The washer makes a thumping sound2 causes in the manual. First: A heavy load.
Sources
- User manual, Washer WA49B5205A*. Samsung Electronics America, Inc. Document DC68-04037Q-05, revision 05, 72 pages, en. downloadcenter.samsung.com (PDF). Listed on the manufacturer's support page. Retrieved 13 November 2026.
Page numbers are the numbers printed in the manual. Where this page and the manual differ, follow the manual.