Samsung WA49B5205AW the load is wet at the end of the cycle

Cause 1 of 3The spin speed is too low. Source: Troubleshooting: Checkpoints, p. 55

First checkUse the High or Extra High spin speed cycle. This applies to applicable models only.

Causes and checks

  1. The spin speed is too low. Source: Troubleshooting: Checkpoints, p. 55

    1. Use the High or Extra High spin speed cycle. This applies to applicable models only.
  2. Too much detergent or the wrong type is making suds. Source: Troubleshooting: Checkpoints, p. 55

    1. Use high-efficiency (HE) detergent to reduce oversudsing.
  3. The load is too small. Source: Troubleshooting: Checkpoints, p. 55

    1. Add items. Small loads of one or two items may become unbalanced and not spin completely.

Service

If the checks above do not clear it, contact Samsung Customer Service: 1-800-SAMSUNG (726-7864), samsung.com/us/support/. United States. Source: Troubleshooting: Information codes, p. 60

Other WA49B5205AW problems

Sources

  1. User manual, Washer WA49B5205A*. Samsung Electronics America, Inc. Document DC68-04037Q-05, revision 05, 72 pages, en. downloadcenter.samsung.com (PDF). Listed on the manufacturer's support page. Retrieved 13 November 2026.

Page numbers are the numbers printed in the manual. Where this page and the manual differ, follow the manual.

Applies to
WA49B5205AW (variant WA49B5205AW/US). United States.
Source
User manual, Washer WA49B5205A*, DC68-04037Q-05 revision 05
Last verified
Handbook
Samsung WA49B5205AW top-load washer in Washers; all Samsung handbooks