Shark RV2500AE Series (RV2502AE) how to start or stop a cleaning cycle by hand
To clean without the schedule, or to end a cleaning cycle early.
Steps
- Press the CLEAN button on the robot or in the mobile app to start a cleaning session.
- Press CLEAN again to stop the cleaning session, or press DOCK to stop cleaning and send the robot back to the base to recharge.
Source: Buttons and indicator lights; Manual cleaning mode Source: Buttons and indicator lights; Manual cleaning mode, pp. 6, 8
Other RV2500AE Series (RV2502AE) procedures
- How to set up the base and robotBefore the first cleaning.
- How to charge the robot on the baseBefore the first cleaning, or when the robot has no charge or cannot return to the base.
- How to turn the robot on or offTo power the robot on, or to turn it off for storage.
- How to empty the base dust binWhen the debris level approaches the max fill line; the bin holds up to 60 days' worth of dust and debris.
- How to empty the robot dust binAfter each use, or when the bin needs emptying.
- How to clean the robot filterAfter each use, to keep suction power up.
- How to clean the base pre-motor filtersOnce a month.
- How to clean the base post-motor filterEvery year.
- How to remove debris from the brushrollWhen debris remains wrapped around the brushroll after continued cleaning.
- How to clean the sensors and charging contactsAs needed; the cliff sensors may work less effectively when they are dirty.
- How to clean the side brushAs needed, or when error 2 shows a stuck side brush.
- How to clean the LiDAR modulePeriodically, to remove hair and debris from the navigation module on top of the robot.
- How to clean the front wheelPeriodically.
- How to clean the drive wheelsPeriodically, or when error 2 shows a stuck drive wheel.
- How to restart the phone, robot and routerWhen the robot still cannot connect to Wi-Fi.
- How to retry the Wi-Fi connection after a disconnectWhen the Wi-Fi connection randomly disconnects.
- How to enable the Shark skill for Amazon AlexaTo control the robot by voice with Amazon Alexa.
- How to link the Google Assistant on an Apple deviceTo control the robot by voice with the Google Assistant on an Apple device.
- How to link the Google Assistant on an Android deviceTo control the robot by voice with the Google Assistant on Android.
Sources
- Shark AI Ultra Robot Self-Empty XL Robot Vacuum RV2500AE Owner's Guide. SharkNinja Operating LLC. Document RV2500AE_IB_REV_Mv5, revision Mv5, 17 pages, en. support.sharkninja.com. Listed on the manufacturer's support page. Retrieved 13 November 2026.
Page numbers are the numbers printed in the manual. Where this page and the manual differ, follow the manual.