GE GTD65EBSJWS electric dryer with Sensor Dry
- Category
- Dryers
- Model number
- GTD65EBSJWS
- Region
- United States
- Verified
- Rating label
- On the inside front face of the dryer compartment, on the left or right side, with the door open. Source: support page
- Dryer does not start
- Dryer does not heat
- Dryer shakes or makes noise
- Greasy spots on clothes
- Lint on clothes
- Static occurs
- Drying times are inconsistent
- The Dry dryness level was chosen but the load is still damp
- Clothes take too long to dry
- Clothes are wrinkled
- Clothes shrink
- Collars and waistbands are still wet at the end of the cycle
- Clothes are still wet and the dryer shuts off after a short time
- Dryer continues to tumble after the display says complete
- How to clean the exhaust duct
- How to clean the lint filter
- How to lock or unlock the controls
- How to save a My Cycle setting
Nothing on this page matches. Search all models
Problems
- Dryer does not start2 causes in the manual. First: the dryer is unplugged.
- Dryer does not heat2 causes in the manual. First: A fuse is blown or a circuit breaker is tripped. The dryer may tumble but not heat when only one fuse is blown or one breaker is tripped.
- Dryer shakes or makes noiseSome shaking and noise is normal, or the dryer is sitting unevenly.
- Greasy spots on clothes3 causes in the manual. First: fabric softener was used improperly.
- Lint on clothes5 causes in the manual. First: the lint filter is full.
- Static occurs3 causes in the manual. First: no fabric softener was used.
- Drying times are inconsistentThe type of heat differs. Automatic drying times vary with the type of heat (electric, natural or LP gas), the size of the load, the fabrics, the wetness of the clothes and the condition of the exhaust ducts.
- The Dry dryness level was chosen but the load is still damp2 causes in the manual. First: the load mixes heavy and light fabrics.
- Clothes take too long to dry8 causes in the manual. First: the load is not sorted. A well-sorted washer load is generally a well-sorted dryer load.
- Clothes are wrinkled3 causes in the manual. First: the clothes were overdried.
- Clothes shrinkSome fabrics shrink when washed, and others can be washed safely but shrink in the dryer.
- Collars and waistbands are still wet at the end of the cycleThe dryness monitor senses that the body of the clothes is dry.
- Clothes are still wet and the dryer shuts off after a short time4 causes in the manual. First: the door was opened mid-cycle, the load was removed and a new load was put in without selecting a new cycle.
- Dryer continues to tumble after the display says completeThe Extended Tumble option was selected.
Dryer shakes or makes noise
Some shaking and noise is normal, or the dryer is sitting unevenly. Source: Troubleshooting Tips, p. 12
- Move the dryer to an even floor space, or adjust the leveling legs until it is even.
Drying times are inconsistent
The type of heat differs. Automatic drying times vary with the type of heat (electric, natural or LP gas), the size of the load, the fabrics, the wetness of the clothes and the condition of the exhaust ducts. Source: Troubleshooting Tips, p. 12
- Compare the load and the exhaust condition with earlier loads.
Clothes shrink
Some fabrics shrink when washed, and others can be washed safely but shrink in the dryer. Source: Troubleshooting Tips, p. 13
- Follow garment care labels exactly. Some items may be pressed back into shape after drying.
- If you are concerned about shrinkage in a particular item, do not machine wash or tumble dry it.
Collars and waistbands are still wet at the end of the cycle
The dryness monitor senses that the body of the clothes is dry. Source: Troubleshooting Tips, p. 13
- Choose Speed Dry or Timed Dry to dry damp collars and waistbands. For a later load with collars and waistbands, choose More Dry.
Dryer continues to tumble after the display says complete
The Extended Tumble option was selected. Source: Troubleshooting Tips, p. 14
- Make sure the Extended Tumble option is not selected.
No numbers are displayed during the cycle, only lights
The dryer is continuously monitoring the amount of moisture in the clothes. When it senses a low level of moisture, it displays the dry time remaining. Source: Troubleshooting Tips, p. 14
Time Remaining jumped to a lower number
The estimated time may change when a smaller load than usual is drying. Source: Troubleshooting Tips, p. 14
The dryer is running but 00 is displayed in Time Remaining
The Extended Tumble option was chosen. The time remaining is not displayed during Extended Tumble, which lasts approximately 60 minutes. Source: Troubleshooting Tips, p. 14
How-to
- How to clean the exhaust ductAt least once a year, to prevent clogging. A partially clogged exhaust lengthens the drying time.
- How to clean the lint filterBefore each use. Also when the lint filter has a waxy buildup from fabric softener sheets, or dryer performance changes.
- How to lock or unlock the controlsTo stop children starting the dryer by touching buttons, or when buttons do not respond because the controls are locked. The Power button still works when the controls are locked.
- How to save a My Cycle settingTo make the dryer remember the Time, Level and Temp settings for one cycle knob position.
Maintenance
| Task | When | Source |
|---|---|---|
| Clean the lint filter | Before each use | Source: Care and Cleaning of the Dryer: The Lint Filter, p. 10 |
| Inspect and clean the exhaust ducting to prevent clogging | At least once a year | Source: Care and Cleaning of the Dryer: The Exhaust Duct, p. 10 |
| Clean the interior of the dryer and the exhaust duct (professional service) | Once a year | Source: Care and Cleaning of the Dryer: Dryer Interior and Duct, p. 10 |
| Wipe or dust spills and washing compounds from the exterior with a damp cloth. Apply laundry pretreatment soil and stain removers away from the dryer, because they can damage the control panel and finishes. | Source: Care and Cleaning of the Dryer: The Exterior, p. 10 |
Settings
| Setting | Options | Default | Notes | Source |
|---|---|---|---|---|
| Control Lock | Press and hold the Extended Tumble and - (minus) buttons for 3 seconds | Locks the selections, and can be set after a cycle has started. The Power button still works. | Source: Operating Instructions: Control Lock, p. 5 | |
| eDry | On, Off | On for Cottons | Available for Bulky Items, Towels/Sheets, Cottons, Mixed Load, Jeans, Casuals and Delicates. Reduces the total energy use of the sensor cycle and changes the cycle time. | Source: Operating Instructions: eDry, p. 6 |
| Dryness level | More Dry, Dry, Less Dry, Damp | Used only for sensor cycles. Dry is the preferred level for energy savings. | Source: Operating Instructions: Settings, p. 7 | |
| Temperature | High, Medium, Low, No Heat | High for regular to heavy cottons. Medium for synthetics, blends, delicates and permanent press. Low for delicates, synthetics and tumble dry low items. No Heat only with Air Fluff. | Source: Operating Instructions: Settings, p. 7 | |
| Extended Tumble | On, Off | Provides 1 hour of no-heat tumbling after the clothes are dry, to minimize wrinkles. | Source: Operating Instructions: Extended Tumble, p. 7 | |
| Damp Alert | On, Off | Beeps when clothes have dried to a damp level while the cycle keeps running. The light beside the button is lit when it is on. | Source: Operating Instructions: Damp Alert, p. 7 | |
| Drum Light | Press the Damp Alert button for 3 seconds, or open the door | Turns off when the door is shut, when Damp Alert is pressed again for 3 seconds, or after 5 minutes if the door is left open. | Source: Operating Instructions: Drum Light, p. 7 | |
| Delay Dry | 1 hour steps up to 24 hours, then back to 0 | Delays the start of the cycle. After setting the delay, press Start and the delay counts down. | Source: Operating Instructions: Delay Dry, p. 7 | |
| Signal Adjust or Volume | Press the button until the volume you want, or off | Changes the volume of the button presses and the end-of-cycle signal. | Source: Operating Instructions: Signal Adjust or Volume, p. 7 |
Specifications
Electric dryer, 7.4 cu. ft., with Sensor Dry, eDry, Extended Tumble, Damp Alert, Delay Dry and My Cycle. Source: Operating Instructions: Features, pp. 5-8
Clean the lint filter before each use, and have the exhaust duct inspected and cleaned at least once a year. A partially clogged exhaust lengthens the drying time. Source: Care and Cleaning of the Dryer, p. 10
| Capacity | 7.4 cu. ft. | Source: Dimensions and installation information, p. 1 |
|---|---|---|
| Electric rating | 240 V, 5600 W, 24 A, 60 Hz; or 208 V, 4400 W, 22 A, 60 Hz | Source: Dimensions and installation information, p. 1 |
| Circuit requirement | An individual, properly grounded branch circuit protected by a 30-amp circuit breaker or time-delay fuse. The wall outlet must be within 36 inches of the service cord entry. | Source: Dimensions and installation information, p. 1 |
| Exhaust options | 4-way: rear, right, left and bottom | Source: Dimensions and installation information, p. 1 |
| Model and serial number location | On the label on the front of the dryer, behind the door | Source: Cover, p. 1 |
Recalls
No exact-model match for GTD65EBSJWS in the U.S. Consumer Product Safety Commission recall database, checked . Recalls can name model families, so also check current recalls for GE Appliances.
Service contact
GE Appliances: 800.GE.CARES (800.432.2737), geappliances.com/service. United States. Source: Consumer Support: Schedule Service, p. 16
Sources
- Owner's Manual, Dryers 49-90536-3. GE Appliances, a Haier company. Document 49-90536-3, revision 02-17, 2017-02, 32 pages, en-US. images.salsify.com (PDF). Listed on the manufacturer's support page. Retrieved 13 November 2026.
- Quick Specs, GTD65EBSJ 7.4 Cu. Ft. Capacity Aluminized Alloy Drum Electric Dryer With HE Sensor Dry. GE Appliances. Document GTD65EBSJ, revision Quick Specs, 3 pages, en-US. images.salsify.com (PDF). Listed on the manufacturer's support page. Retrieved 13 November 2026.
Page numbers are the numbers printed in the manual. Where this page and the manual differ, follow the manual.
All GE Appliances handbooks. Report an error to hello@modelhandbook.com.